 Dnepr
join:2001-11-28
Tarpon Springs, FL | reply to stevier5000
Re: How To: MI424-WR Network Bridge + working FIOS TV All this work... when you can just ASK Verizon to enable CAT5E on the ONT... |
|
|
|
| said by Dnepr:All this work... when you can just ASK Verizon to enable CAT5E on the ONT... That would require a new, ugly cable run for me, with most of the same downsides. And this is temporary (hopefully) until Verizon/ActionTec fix their firmware or come out with a better product. |
|
Dnepr
join:2001-11-28
Tarpon Springs, FL | said by stevier5000:said by Dnepr:All this work... when you can just ASK Verizon to enable CAT5E on the ONT... That would require a new, ugly cable run for me, with most of the same downsides. And this is temporary (hopefully) until Verizon/ActionTec fix their firmware or come out with a better product. Besides running the cable there are no of same downsides.
All you have to do is change IP on your main router and plug Actiontec into it using Actiontecs WAN to routers LAN port.
Everything will work from that point on. |
|
