Re: Thomson SpeedTouch 5x6 & 585 EJTAG "De-Brick" Access

Author

All Replies

Triups2

join:2007-11-23
canada

internals

I haven't actually received this modem yet (the company I bought it from has been messing up badly and finally shipped it today from a purchase date of nov 21)

but here is the support page:
»www.usr.com/support/product-temp···rod=9108

and the source code:
»www.usr.com/support/s-gpl-code.asp?loc=unst

not sure if it has what you want, but these are the internals:
Lan Ports: BCM5325EKQM
Adsl: BCM6348KPBG
cpu: bcm96348

to forum · permalink · 2007-12-07 03:26:47 · (locked)

Bicephale

join:2005-09-24
kudos:3

Hi,

I guess it may be too late but have you considered
to discuss with the owner/author of this picture?:

US Robotics 9108 Disassembly, Rene Bartosh (aka KirJava), 2006-Dec-20

to forum · permalink · 2007-12-07 09:13:56 · (locked)

chaveiro

join:2007-12-06

Ive tried us robotics firmware, no success. The bootloader of speedtouch aka CFE does not loads it and the usr CFE does not run on speedtouch, at last i could not put it to run.

Anyway.. How can send me backup of a normal 585 v6 CFE file ? (se above how to)

to forum · permalink · 2007-12-11 04:00:12 · (locked)

Bicephale

join:2005-09-24
kudos:3

reply to Triups2

US Robotics 9108 Console & JTAG Access

Hi GGPR,

Can you get a better snapshot of this area for us please?

to forum · permalink · 2008-01-07 15:42:37 · (locked)

Triups2

join:2007-11-23
canada

I can, it will have to wait until I get home on Thursday.

to forum · permalink · 2008-01-14 18:07:18 · (locked)

O Canada! > Canadian > Canadian Broadband > Thomson SpeedTouch 5x6 & 585 EJTAG "De-Brick" Access

Re: Thomson SpeedTouch 5x6 & 585 EJTAG "De-Brick" Access