qqquest
@net.my
| reply to qqquest
Re: [Streamyx] Streamyx modem Adsl light goes off at times
i'm now using this riger db102 modem by tmnet and the configuration is:-
encapsulation : pppoe llc
vpi/vci : 0/35
bridge : disabled
IGMP : disabled
use DHCP : enable
default route : enabled
i've tried enabled and disabled bridge,IGMP and use DHCP.
I'm not sure which is the SNR margin and line attenuation figures and i'll show you the DSL param.
DSL Parameters and Status
Vendor ID: 00B5GSPN
Revision Number: E.37.5.5
Serial Number: 123456789abcdx
Local Tx Power: 11.7 dB
Remote Tx Power: 17.5 dB
Local Line Atten.: 46.0 dB
Remote Line Atten.: 24.5 dB
Local SNR Margin: 7.0 dB
Remote SNR Margin: 24.0 dB
Self Test: Passed
DSL Standard: G.dmt
Profile: MII
Tx Line Rate: 512 Kbps
Rx Line Rate: 2464 Kbps
Framing Structure: Framing-3
Trellis Coding: Enable
Power Management Mode: L2, L3 Not Allowed
......................................
before this i'm using the bipac 5112s by tmnet as well, but now already changed this.
i called to hotline and they told me to try direct connection. if direction connection there's no such condition happen.
so, i tried my cousin modem which is the linksys am300 (with and without direct connection).also no such condition happen. only the annoying modem by tmnet will be like that. could it be the configuration not right?
please help me? thx |
