Zombie999
join:2004-05-04
Toronto, ON
| reply to hhpeter
Re: FREE VOIP for life -softphone- Toronto/Montreal numbers only
said by hhpeter  :I would like to try it on a ata too but first things first is your softphone working???cause mine is not really outgoing is ok but incoming is not working my home phone keeps ringing even though I answered on the softphone.... anyone has this problem or its just me? I have the exact same problem. If you look that my original post, I have stated that incoming is not working. |
|
Zombie999
join:2004-05-04
Toronto, ON
| reply to Zombie999
This was posted by an employee of this company in another forum regarding incoming calls.
"This one will be fixed next week, we need some of the staff back from Christmas and we will release an upgrade to the phone which will repair it.
thanks," |
|
hhpeter
join:2006-10-15
GTA | reply to Zombie999
thanks
taught I saw somewhere stating that the incoming is not working when first read the tread but after I looked back and couldn't find it  |
|
EVH
@cia.com | I can't hear anything when I dial out. I use the 1-416-???-???? number and I get ringing, then connected and I hear nothing. It does ring on the other end but it's deal silent. I can't send or receive. Anyone have this problem? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by EVH :
I can't hear anything when I dial out. I use the 1-416-???-???? number and I get ringing, then connected and I hear nothing. It does ring on the other end but it's deal silent. I can't send or receive. Anyone have this problem? Are you having this problem through the softphone or an ATA device? |
|
EVH
@cia.com | Softphone. I downloaded the software, installed it and when I place a call it rings on the other end but they can't hear me and I can't hear them. It shows me as connected. |
|
somethingworks
@rogers.com | reply to Zombie999
Has anybody been able to get their voice mails delivered as emails as stated in the blurb. Do not seem to be any options for setting that up either and no - they are not going into my junk mail folder |
|
freephoneline
@rogers.com
| reply to meucumpade
Hi there,
At this moment we do not support ATA's or 3rd party SIP phones. We will be offering a solution within a couple weeks.
Cheers,
Freephoneline Employee
said by meucumpade :
This is the configuration on my pap2t-na
Proxy: voip.freephoneline.ca
Dispaly name: My Name
User ID: My 11 digit number
Password: the one I signed up with them
Use Auth ID: YES
Auth ID: the on I found in "C:\Documents and Settings\my_name\FreePhoneLine\FreePhoneLine.cfg"
This is what I got so far.
I now get "This account number is not valid" instead of "This password is not valid"
Any ideas?
|
|
freephoneline
@rogers.com | reply to qingz
Hello,
At this moment we do not support 3rd party SIP phones or ATA's.
We will have a solution available on our web site in the next couple weeks.
Cheers,
Freephoneline Employee |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to EVH
said by EVH :
Softphone. I downloaded the software, installed it and when I place a call it rings on the other end but they can't hear me and I can't hear them. It shows me as connected. This sounded like a NAT/Firewall issue. Did you configure your softphone with STUN options if your computer is connected to an Internet feed behind a NAT/Firewall router? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to freephoneline
said by freephoneline :
At this moment we do not support 3rd party SIP phones or ATA's. Thank you for clarifying this issue.
We will have a solution available on our web site in the next couple weeks. Hopefully, we will be allowed to BYOD. |
|
sheker
@rogers.com | reply to Zombie999
Changing the 'follow-me' number on the website does not seem to work very well. It shows the changes have been saved, yet a call to my number still goes to the previous number that was there.
Anyone else having this issue? |
|
EVH
@cia.com | reply to mazilo
How do I change the Firewall settings. I see no configuration options in this software? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by EVH :
How do I change the Firewall settings. I see no configuration options in this software? You will need to consult with the manual comes with your router to find out how to disable its Firewall setting(s). |
|
EVH
@cia.com | I don't mind opening a port but i don't want to remove my Firewall completely.
What is the port that it's trying to use? |
|
Sergo
join:2007-11-12
Kitchener, ON | reply to freephoneline
Q to freephoneline?
Why your software doesn't run on x64 Windows? |
|
sheker
@rogers.com | reply to Zombie999
Follow-me settings are still 'stuck' to original settings, despite changing them repeatedly. Buggy.
They should show current 'follow-me' settings on the web site profile. |
|
Anonymous1
@ericsson.ca | reply to Zombie999
try port 6060 instead of 5060. It seems that freephoneline is using 6060. As my softphone does not work, I tried "check network connection" from freephoneline softphone, and it gave info about 6060 and another one (donot remember). |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to EVH
said by EVH :
I don't mind opening a port but i don't want to remove my Firewall completely.
What is the port that it's trying to use? You will have to ask FreePhoneLine what ports are used on its softphone. AFAIK, you are better off using STUN options instead of manually open ports on your router.
--
Mazilo
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574 |
|
kenen
@rogers.com | reply to Zombie999
does this work in ipod touch using the sip-voip app and what would the setting be |
|
