Sergo
join:2007-11-12
Kitchener, ON | reply to freephoneline
Re: FREE VOIP for life -softphone- Toronto/Montreal numbers only
Q to freephoneline?
Why your software doesn't run on x64 Windows? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to freephoneline
said by freephoneline :
At this moment we do not support 3rd party SIP phones or ATA's. Thank you for clarifying this issue.
We will have a solution available on our web site in the next couple weeks. Hopefully, we will be allowed to BYOD.  |
|
freephoneline
@rogers.com | reply to qingz
Hello,
At this moment we do not support 3rd party SIP phones or ATA's.
We will have a solution available on our web site in the next couple weeks.
Cheers,
Freephoneline Employee |
|
qingz
join:2003-10-20
Canada
3 edits | reply to sumdum
said by sumdum  :have you tried the password in this config file? "C:\Documents and Settings\your_name\FreePhoneLine\FreePhoneLine.cfg" Tried, it does not work.
I use the 11 digits phone number as username.
Still get "This password is not valid" when I dial. |
|
sumdum
join:2006-02-18
usa | reply to mazilo
have you tried the password in this config file?
"C:\Documents and Settings\your_name\FreePhoneLine\FreePhoneLine.cfg" |
|
MikeNET
join:2007-05-13
3 edits | reply to mazilo
Thanks for posting SIP Proxy/server value (208.65.240.142), much appreciated.
Anyone had any success in using 3rd party VoIP/SIP Client software (eg: wxCommunicator, Express Talk)?
3rd party software is asking for "Line URI" in this format:
Would anyone venture a guess (I attempted few combinations, but none of them worked) as to possible value of "Line URI" for FreePhoneLine.ca |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
1 edit | reply to ogdensburg
I tried using the DID number (1416xxxxxxx) as a user name and my PAP2v1 seems to register without a problem; however, when I called my number from UK, I got into my voicemail. 
EDIT: I placed some local calls to Toronto and I kept getting This password is not valid error messages. |
|
ogdensburg
join:2006-12-12
Ogdensburg, NY
| reply to mazilo
I can get the ip address of sip server ip 208.65.240.142, but I can't receive/make phone call after I registered it with my PAP2.
server: 208.65.240.142
username: your e-mail
password: your password
Anybody who has freephoneline account can try it. |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| reply to ogdensburg
said by ogdensburg :I tried but no luck. You can register but you can't make/receive phone call. They must use auth_id instead of user id only. Don't SIPURA ATA devices support this option? |
|
ogdensburg
join:2006-12-12
Ogdensburg, NY
| reply to redshift
I tried but no luck. You can register but you can't make/receive phone call. They must use auth_id instead of user id only.
Send an e-mail to them and ask if they support, the answer is 'currently we don't support hardware yet', which means they may support hardware client in the future. |
|
redshift
Premium
join:2004-03-23
Beverly Hills, CA | reply to ilhy
Anyone use wireshark to figure out how to get their username and password yet, so we can register this on an ATA? |
|
