BryanOnRR
join:2007-06-22
Brandon, FL
 ·Verizon FIOS
 ·Bright House
·RoadRunner Cable
| reply to Bulls729
Re: NEW! MI424WR FW 4.0.16.1.56.0.10.7
With some research it make no difference on the version of the router, Thanks for the news, The firmware works, don't notice any difference though.
Any details on what has changed?
--
The Maxx
max dn 22mbps / max up 4.7mbps |
|
Bulls729
join:2007-05-03
Riverview, FL | Well my router kept rebooting itself all the time and would not connect to Verizon, now it works flawlessly, also as an addendem, I DMZ my AcT. to my AirPort Extreme which connects wirelessly to my 360 and get an open NAT. |
|
noshooz
join:2001-12-12
Columbia, MD
1 edit | OK. I just successfully upgraded to the new firmware. Let's see how it goes.
Update: 8:00pm -- wi-fi connections are now dropping out and coming back up intermittently. Sigh.. I switched from 'automatic' to a set channel (10). |
|
joecon
join:2001-02-12
Pittsburgh, PA | I had the same problem and updated to the new firmware and all is well.....so far |
|
KenAF
join:2006-01-23
Arlington, VA | With the new firmware, all devices with a static ip are listed on the main page, regardless of whether they are actually on. |
|
noshooz
join:2001-12-12
Columbia, MD
| said by KenAF  :With the new firmware, all devices with a static ip are listed on the main page, regardless of whether they are actually on. I noticed that, too. All devices that have been assigned IPs are showing up, whether connected or not. Those not connected are shown as "inactive." I guess this is a new "feature" that as added. I wonder if there's a menu item somewhere that will allow to only select active devices. |
|
KenAF
join:2006-01-23
Arlington, VA | Before this update, my Denon receiver was not properly pulling an IP via DHCP unless I actually used its NET functions (Internet radio, etc).
Now the Denon always has an IP and I can connect to it with my computer the moment I turn it on. |
|
rtcy
FACTS only please
Premium
join:1999-10-16
Beverly Hills, CA
 ·Verizon west (ex G..
·Verizon FIOS
1 edit | said by KenAF :Before this update, my Denon receiver was not properly pulling an IP via DHCP unless I actually used its NET functions (Internet radio, etc). Now the Denon always has an IP and I can connect to it with my computer the moment I turn it on. sigh.... Ken now you're gonna make me update my Harman Kardon so it can have ip connectivity 
bulls 729 tahnks for that post!
--
no sports watched here, so don't want to pay for it! |
|
