http://www.dslreports.com/forum/r19735249 en Wed, 10 Feb 2010 10:50:57 EDT Wed, 10 Feb 2010 10:50:57 EDT http://www.dslreports.com/forum/remark,19735302 d_l : That's ok. The 4100b squeezes a little more attenuation and noise margin improvement out of the loop, but no more speed unless the line is having problems.

The 4100 has a nifty diagnostic that seems to be undone by the 4100b: »SBC DSL FAQ »What do the hybrid numbers mean and what do they tell you about your line?]]> http://www.dslreports.com/forum/remark,19735302 Fri, 04 Jan 2008 00:30:12 EDT http://www.dslreports.com/forum/remark,19735282 martyp : just say 4100 then model#060-d141-a39]]> http://www.dslreports.com/forum/remark,19735282 Fri, 04 Jan 2008 00:23:43 EDT http://www.dslreports.com/forum/remark,19735249 d_l : The label sticker on the bottom has the modem version.]]> http://www.dslreports.com/forum/remark,19735249 Fri, 04 Jan 2008 00:16:14 EDT http://www.dslreports.com/forum/remark,19735240 martyp : mmm have to look any way to tell the 4100 from 4100b]]> http://www.dslreports.com/forum/remark,19735240 Fri, 04 Jan 2008 00:13:44 EDT http://www.dslreports.com/forum/remark,19735223 d_l : Those are pretty good. If they stay that good, you will not have problems.

Is the new modem a 4100 or a 4100b?]]> http://www.dslreports.com/forum/remark,19735223 Fri, 04 Jan 2008 00:10:29 EDT http://www.dslreports.com/forum/remark,19735197 martyp : Ok just what i hope is a quick question.

I installed a 4100 to replace my old 4 light 5100.

Before I put it in front of the router I got some stats off of it .
Line State UP
Modulation ANSI
Data Path fast

To Modem To Internet
Max Allowed Speed (kbps) 6016 768
SN Margin (dB) 10.5 -
Line Attenuation (dB) 36.5 -
Loss of Signal 0 -
Loss of Frame 0 0
CRC Errors 1 2

are these good or bad stats?]]> http://www.dslreports.com/forum/remark,19735197 Fri, 04 Jan 2008 00:05:15 EDT