Parnelli
join:2008-01-04
New Market, TN
| reply to Parnelli Jones
Re: Cisco 804 ISDN TA looses it's mind
Config. Yes, I am Parnelli Jones.
Current configuration : 2910 bytes
!
version 12.2
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname xxxxxxxxxx
!
boot system flash:c800-y6-mw.122-1
logging buffered 8192 debugging
logging rate-limit console 10 except errors
enable secret 5 xxxxxxxxxxxxxxxxxxxx
!
username xxxxxxx password 7 xxxxxxxxxxxxxx
!
dial-peer voice 1 pots
caller-id
call-waiting
ring 0
registered-caller ring 1
port 1
destination-pattern xxxxxxx
!
dial-peer voice 2 pots
caller-id
call-waiting
ring 0
registered-caller ring 1
port 2
destination-pattern xxxxxxx
!
pots country US
ip subnet-zero
no ip source-route
!
ip dhcp pool DHCPPoolLAN_0
network 192.168.10.0 255.255.255.0
dns-server 209.210.176.8 209.210.176.9
default-router 192.168.10.1
!
ip name-server 209.210.176.8
ip name-server 209.210.176.9
no ip finger
no ip dhcp-client network-discovery
isdn switch-type basic-ni
!
!
!
interface Ethernet0
ip address 192.168.10.1 255.255.255.0
ip access-group 121 in
no ip proxy-arp
ip nat inside
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 xxxxxxxxxxxxxx xxxxxxx
isdn spid2 xxxxxxxxxxxxxx xxxxxxx
isdn incoming-voice modem
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
ppp authentication chap pap callin
ppp multilink
ppp timeout multilink link remove 2399
!
interface Dialer0
no ip address
no cdp enable
!
interface Dialer1
description ISP
ip address negotiated
ip access-group 121 in
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer pool 1
dialer remote-name xxxxxxx
dialer idle-timeout 2400
dialer string xxxxxxx class DialClass
dialer string 6844134
dialer hold-queue 10
dialer load-threshold 10 either
dialer-group 1
pulse-time 0
ppp authentication chap pap callin
ppp chap hostname xxxxxxxxxxxxx
ppp chap password 7 xxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxx password 7 xxxxxxxxxxxxxxxxx
!
ip nat inside source list 18 interface Dialer1 overload
ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
dialer isdn speed 64
access-list 18 permit 192.168.10.0 0.0.0.255
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 2
exec-timeout 0 0
login local
line vty 3
exec-timeout 0 0
password 7 xxxxxxxxxxxxxxxxxx
login local
line vty 4
exec-timeout 0 0
login local
!
!
time-range TIME
periodic daily 0:00 to 23:59
!
end
By the way, leaving the TA off and disconnected from the IDSN line did no good. I'm back to using my old reliable 3com Office Connect Lan TA.
--
Parnelli
The master of bad jokes and ruler of the land of odd.
Let's go Flyers! |
|
Parnelli
join:2008-01-04
New Market, TN
| ....UPDATE....
I got a config file from someone that has one of these units, changed it to match my information (SPIDs, Dialin number) and also got a new flash file from him. I updated the TA and all is now well. The TA connects without any issues and works like it did before. I have no clue what it's issue was.
Thanks for all the help.
--
Parnelli
The master of bad jokes and ruler of the land of odd.
Let's go Flyers! |
|
