vljenewein
join:2004-03-14
Fennville, MI
 ·HughesNet Satellit..
| reply to millham
Re: Lets create an FAQ for hnFAPMon
On the Options, "Disable Audio Alerts" What are the audio alerts for and are they configurable? Do they tell you that you are downloading too much at the moment?
--
Verns didgeridoo info: »vernsdidj.com |
|
SuperWho
join:2009-01-17
Terrell, TX | reply to millham
I just installed hnfapmon on my new pc with vista. i updated the defs and it showed 100% all the time. Went into the defs through notepad and updated as i read in other posts, now it shows -1030% but i'm not fap'd???? What am I doing wrong? |
|
io chico
join:2003-12-30
Chico, CA
 ·DigitalPath
·HughesNet Satellit..
| If I remember correctly, hnfapmon doesn't like Vista's clocks. Try removing the clock in the Task Bar and if you have one, a clock in the SideBar. Try going into hnFAPMon's Control Panel and Stop/Start the Service to see if that helps.
--
hn7000s home plan| signal 87 | SatMex5 | 117 West | Vista laptop 3GB ram | XP 1GB ram | Ubuntu Dapper 512MB ram | Firefox only | ZyXEL router |
|
CharleyG
join:2008-01-06
Cusseta, GA
| reply to millham
rx and tx values constantly remain at zero
This thread has been very helpful to me, many times. Thanks to all who have answered questions!
This time, I seem to have something a little different, though.
The symptom is that the rx and tx values continue to be constantly zero. That usually occurs when the command number is wrong for the current software release. Mine is 5.6.1.35, since August 2008. But, lest I mislead anybody, I just got a new pc with Vista, and I've reinstalled hnfapmon due to that. I went to the advanced configuration, and hovered over the PEP summary, and I can see in my status bar that the command number should be 71, so I added a line for 5.6.1.35 similar to the others, with the command set to 71. That usually does the trick, but not this time.
Does anybody have a tip for me? |
|
ih57452
join:2007-12-21
Wilsonville, AL
| Right-click on Notepad in the start menu then click 'Run as Administrator'. Then click file->open and find the pm file you want to edit. When you don't run Notepad as Administrator, it's actually saving the file to [your user folder]/AppData/Local/VirtualStore/Program Files/hnFAPMon (AppData is a hidden folder). When you run Notepad as Administrator, it's saving it to your real Program Files folder, which is where the hnFAPMon Service looks since it's running as Administrator. |
|
CharleyG
join:2008-01-06
Cusseta, GA
| This post was really helpful to me, being a Vista newbie. Thanks! It didn't actually solve my problem, but it taught me some valuable information. No, this time it was "a loose nut behind the keyboard" that was causing all the problems. I was editing the wrong .pm file. doh! |
|
flroots
join:2007-02-05
Madison, SD
 ·Future Nine Corpor..
·callwithus
| reply to millham
Re: Lets create an FAQ for hnFAPMon
Is there a separate thread somewhere for multiple computers? I want to know what happens with the hnFAPmon readings if the server computer is turned off while a client is in use and later turned back on. Are the readings then in error? Put another way, does the server computer have to be on whenever a client is running in order to maintain correct hnFAPmon readings? |
|
TRB
@direcpc.com
| reply to millham
Can anyone provide a complete, universal explanation on what the following fap.ini settings should be? That is, account for Standard and Savings Time, Zulu/Grennwhich, and various time zones? Twice a year I have to spend an hour figuring this out. I'm sure others would like to know an easy way to make the proper corrections.
[NightTimes]
Start=?
End=?
# FAPfree time during Daylight Saving Time
DSTStart=?
DSTEnd=? |
|
inthewoods
join:2007-08-17
Live Oak, FL | I lost track myself.
In the Eastern time zone I'm using 6 & 11 for start/end times for all parameters. Seems to be working correctly, anyway.
--
HN7000S/PRO Plan/93W - 1039/.74m dish/1 watt |
|
yolarry
join:2007-12-29
Creston, WV
·HughesNet Satellit..
| reply to millham
This is latest update files I created |
|
mickeyw
join:2009-05-03
Goshen, AL | Can anyone help? I am using the latest modem defs on a single computer using xp with a hn7000s modem. Fapmon shows 100% and no rx or tx. |
|
yolarry
join:2007-12-29
Creston, WV
·HughesNet Satellit..
| mickeyw
Download those files 2 above you.
Go to start, run, type in...
C:\Program Files\hnFAPMon
Replace your existing fap.ini with the one you just downloaded.
Open ModemDefs folder...
Your modem is a HN7000S right? anyways...
Replace your existing _modem_HNS7000S.pm with the other file you just download
--
HN7000S - 99 West 1370 MHz - Pro - installed October 2007 - Linksys WRT54G V8 - Xbox 360, PSP-1001 CFW - 2 Vista Desktops - 1 XP Desktop - 1 vista Acer Aspire 3680 laptop |
|
io chico
join:2003-12-30
Chico, CA
·DigitalPath
·HughesNet Satellit..
| reply to millham
Has anyone got hnFAPMon to work with Windows 7? I'm doing a dual-boot with Vista & Windows 7 RC, can't get past ???? I have edited the two files, yet still question marks.
--
hn7000s home plan| signal 87 | SatMex5 | 117 West | Vista laptop 3GB ram | XP 1GB ram | Ubuntu Dapper 512MB ram | Firefox only | ZyXEL router |
|
mistercoke
join:2009-03-01
Oak Hill, OH | reply to millham
Pole
Is 2 2/8 the right size of a pole? |
|
lmw
join:2003-01-09
Princeville, IL
| reply to yolarry
hnFAPmon not working --
Binary, I have same problem as mickeyw. adding the new files to the hnfapmon folder didn't help. Still no RX TX movement, actually no movement. hnFAPMon doesn't seem to be registering any activity. Any other suggestions?
--
HN7000S Home|AMC3 (87W) 1250|SigStrgth 47|WinXP-Home on 3 computers 6/15/2007) Loc 61559 |
|
dkayford
@direcway.com
| reply to millham
hnFAPmon fix - software update
Hughes' new software update (5.8.0.49) has caused hnFAPmon to stop working. To fix this, go to C:\Program Files\hnFAPmon\ModemDefs
Open the .pm file that matches your modem;
under the line that begins with default add this new line
'5.8.0.49' => '/cgi/execAdvCom.bin?Command=75',
Save the change, then stop and restart hnFAPmon service. |
|
lmw
join:2003-01-09
Princeville, IL | Thanks!! |
|
yolarry
join:2007-12-29
Creston, WV
·HughesNet Satellit..
| reply to millham
Re: Lets create an FAQ for hnFAPMon
Also I made a easy to use hnFAPmon update..
»[HN7000S] Unoffical hnfapmon HN7000S defs update installer
The installer will make hnfapmon working again!
--
HN7000S - 99 West 1370 MHz - Pro - installed October 2007 - Linksys WRT54G V8 - Xbox 360, PSP-1001 CFW - 2 Vista Desktops - 1 XP Desktop - 1 vista Acer Aspire 3680 laptop |
|
mjburns
join:2005-10-26
Rail Road Flat, CA
| reply to millham
I don't understand why we have to go through this every time hn updates the modem.
"...My PC-OPI program has to do similar things on other command numbers, but I figured out how to find out (programmatically) what the number was when it changed with versions; I shared the info with the hnFAPmon author a couple of years ago, and he said at the time that he would incorporate it but never did.
Don Bradner
www.arcatapet.net"
--
| HN7000S |.74M/1 Watt | hughes.net ProPlus | Fixed-IP | IA8/89W | 1410 MHz | Rec-55/Xpol-72/Rate 256k 4/5 (TC)| XP Pro SP3 | Self Built P4 4.20 GHz/Asus P4P800 Deluxe | 4 GB DDR-SDRAM |(2 ea) Linksys WRT54G_v2.0 | |
|
jahern
join:2007-05-29
Norman, OK
| reply to millham
It seems that HnFAPMon needs the latest firmware version in the .def file, and a number after it, as in
'5.6.1.35' => '/cgi/execAdvCom.bin?Command=71'
How do I find out what those numbers are for my HN7000S? I'm not getting any TX or RX info when it runs... |
|
