Candoo3
join:2005-01-24
 ·TekSavvy Solutions..
| reply to bryanviper
Re: Phone jack Wires Question
said by bryanviper  :I used the Green/Green White wires to connect to the Demarc & have tried different combos on the jack but nothing seems to work? What wires go to what? If I understand you correctly, and you're using this jack solely for the outgoing modem connection, then you would use the same CAT6 wires to connect to the red and green terminals at the jack. The yellow and black should be redundant. Correct me if I am wrong. |
|
bryanviper
join:2002-10-12
Toronto, CAN
·TekSavvy Solutions..
·Nothing But Net
| said by Candoo3 :said by bryanviper :I used the Green/Green White wires to connect to the Demarc & have tried different combos on the jack but nothing seems to work? What wires go to what? If I understand you correctly, and you're using this jack solely for the outgoing modem connection, then you would use the same CAT6 wires to connect to the red and green terminals at the jack. The yellow and black should be redundant. Correct me if I am wrong. yup exactly. I wil try to re strip the cable and do it again on Red & green. Hopefully it was just a bad strip or something.
I'll let you guys know.
Thanks
--
Computer: Intel Quad Core, 2gb OCZ DDr2, 2x Plextor Burners, Corsair 620psu, Antec 900Case, 5mb DSL from teksavvy
»www.MaximumRepair.ca |
|
bryanviper
join:2002-10-12
Toronto, CAN | Still not working for some reason guys.
Re did all connections still nothing. no dial tone from the new jack.
Any ideas? |
|
