how-to block ads
|
HiVolt
Premium
join:2000-12-28
Toronto, ON
clubs:
 ·TekSavvy Solutions..
·Bell Sympatico
| reply to Tl Chris
Re: SpeedStream 4200, DIR625, Azureus
Is your router's WAN port set up for PPPoE authentication, or is it in DHCP, or Automatic? If that's the case, that's your problem.
You need to change it to PPPoE, and enter your bell b1 login/password into the config. Then you can port forward and it will work.
--
GO LEAFS GO!
Don't question the authoritaaaa! | |
Tl Chris
join:2008-02-09
| Thanks HiVolt, you are right, i did that only after i was finnaly able to find a way via a command (192.168.2/brgmode.cgi) to put the SpeedStream in bridge mode, then i went to my DIR 625 and select PPPoE, enter my ISP username and password, check Dynamic IP, Reconnect Mode is ON DEMAND, MAX IDLE TIOME is at 5, Primary and Secondary DNS Server i left at 0.0.0.0, MTU at 1492 and MAC Adress i left a 00:00:00:00:00:00, Save and reboot, and got a Green NAT right away.
But just to make sure, does my PPPOE connection setup is ok ? and do i have to modify anything else in my router ?
Thanks
Christian | |
|
