 Tl Chris
join:2008-02-09
| reply to HiVolt Re: SpeedStream 4200, DIR625, Azureus
Thanks HiVolt, you are right, i did that only after i was finnaly able to find a way via a command (192.168.2/brgmode.cgi) to put the SpeedStream in bridge mode, then i went to my DIR 625 and select PPPoE, enter my ISP username and password, check Dynamic IP, Reconnect Mode is ON DEMAND, MAX IDLE TIOME is at 5, Primary and Secondary DNS Server i left at 0.0.0.0, MTU at 1492 and MAC Adress i left a 00:00:00:00:00:00, Save and reboot, and got a Green NAT right away.
But just to make sure, does my PPPOE connection setup is ok ? and do i have to modify anything else in my router ?
Thanks
Christian |