Re: Mounting board for 612 ONT?

Author	All Replies
troll5501 join:2007-12-11 Wilmington, DE	reply to Rattler Re: Mounting board for 612 ONT? said by Rattler : The mounting board in your photo looks like it might be 24" x 24"? My mounting board is about 18" x 20". The ONT is just about flush with the top and bottom of it. Keep in mind that the cabling will enter from the bottom so you should allow room for that.
troll5501 join:2007-12-11 Wilmington, DE	to forum · permalink · · 2008-02-12 18:48:11 ·
Rattler join:2001-04-13 Havertown, PA ·Verizon Online DSL ·Verizon FIOS	said by troll5501 : My mounting board is about 18" x 20". The ONT is just about flush with the top and bottom of it. Keep in mind that the cabling will enter from the bottom so you should allow room for that. OK, thanks. There should be plenty of room on the 17" x 26" board - that helped a lot. -- Never raise your hands to your kids. It leaves your groin unprotected. -- Red Buttons
	to forum · permalink · · 2008-02-12 18:50:51 ·
troll5501 join:2007-12-11 Wilmington, DE	said by Rattler : OK, thanks. There should be plenty of room on the 17" x 26" board - that helped a lot. FYI, the black cable at the bottom of the picture is the VZ fiber cable. It drops from the top, and the installer routed it behind the board (in the space between the wall studs) and looped it back up from bottom and into the ONT.
troll5501 join:2007-12-11 Wilmington, DE	to forum · permalink · · 2008-02-12 18:54:09 ·


Tuesday, 01-Dec 01:28:41	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF