rockotman...Blown On The Steel BreezeEmerging Research
|reply to ticktack |
Re: SNR on digital cable.
said by ticktack :I did check the in-band stati of both tuners, per the guide that I referenced, and both SNRs there were within the limits that the guide indicates are acceptable.
your HD channels are totally seperate. You need to tune to an HD channel and check the in band status, that will show the SNR for the current frequency you are tuned to.
How high that should be depends on the modulation of the channel. assuiming it is QAM 256 it should be at least 32 but preferably 33 or more.
"I was the bad guy once again. I laughed at their sorrows. Ha ha ha ha ha."