| reply to Hydraglass
Re: [General] DLink VTA-VRHey, your killer was killed
**once you downgrade to 1.0.7 you can download all xml settings for 1.0.9 version. by this way.**
in VTA-VR 1.0.7 web interface
Provisioning File Path: someSFEX
Encryption Key: THEENCRYPTIONKEYFOR1.0.7
get your own information in web interface.
in linux: you can do this:
#atftp ti.tftp.vonage.net
tftp> get /someSFEX/tiMAC.xml
where MAC is your device MAC address like "001b111203"
Ok, put your tiMAC.xml file on windows and do
C:>RC4 THEENCRYPTIONKEYFOR1.0.7 tiMAC.xml myMAC.xml
now you have myMAC.xml decrypted and this file contains all configurations for your 1.0.9 firmware version.
i can show you a little of this file:
<firmware>+001B110B636A/VTA-11.4.1-r060815-1.00.09-r070401.img</firmware>
<profileurl>tftp://ti.tftp.vonage.net:69,21,2400</profileurl>
<profileurl_2>http://httpconfig.vonage.net:80</profileurl_2>
<imageurl>http://httpconfig.vonage.net</imageurl>
<imageurl_2>tftp://ti.tftp.vonage.net:69,21,2400</imageurl_2>
<tftp>ti.tftp.vonage.net</tftp>
<tftpimg>ti.tftp.vonage.net</tftpimg>
<tftpports>69,21,2400</tftpports>
<key>146bf9205c49a8ga59a7ea204asdfsdfsdfsdfsdf5ccde9egffa5d4f2a</key>
<path>VJfefsaefaq</path>
as we can see, now we have THE KEY for 1.0.9 firmware version
and now... :) full hack of VTA-VR in the last version. :) |
