US Telco Support > Verizon > Verizon Online DSL > Verizon DSL Line Monitors - Free

reply to sashwa

Re: Verizon DSL Line Monitors - Free

reply to sashwa
Hi,
I have added my IP address for monitoring my Verizon DSL line.

I understand I need an invite to the group.

I neglected to check Dynamic IP when I first entered the monitoring information and it will not permit me to update it.
Please advise how to do so, if necessary.

Thanks!
Richard

Invite sent, lxrdsl. When you get the invite, you will need to click on the link in the invite and accept.

To edit your monitor go here:

»/monitored/mine

Then click on the edit link. Make your changes and then click on Update monitor.
--
TH ~ NE ~ EPN ~ NC ~ TD

Has monitoring gone down? I am showing no data starting at Noon today. Just a blank as of 12:00P, no green or blue lines.

Tim
--
The difference between genius and stupidity is that genius has its limits.

It must be. My graphs cut off at the same time as well.

EDIT: Looks like it should be fixed. »Line Monitor quit recording

reply to sashwa
Invite sent, iansltx.

reply to sashwa
Invite sent, idean.

reply to sashwa
Invite sent, ivbec.

reply to sashwa
Invite sent, Skier7667.

reply to sashwa
Invite sent, johnfights.

reply to sashwa
Invite sent, Hopkins15531.

reply to sashwa
Add me too, please

Invite sent, Oblivions Ex.

Not seeing any monitoring data yet. Do I just need to be more patient?

When you set your Line monitor up did you 1) enter your current IP in the static IP box AND 2) check the "dynamic" box. You must do both.

You need to be "pingable" . This is important!

»Tweaking FAQ

Make sure your router and firewall accepts WAN requests if you are using a router.
--
TH ~ NE ~ EPN ~ NC ~ TD

Yes

»/testhistory?v···rt=m&p=5

In looking at your monitor via the link above, you are not using your current IP address as it's showing IP: 192.168.x.x. You need to use your public IP address. Go here to find out what it is:

»/whois

Enter that in the in the static IP box and then click on Update Monitor at the bottom of the page. Also make sure the "dynamic" box is checked.
--
TH ~ NE ~ EPN ~ NC ~ TD

OK, that should do it! Thanks.

»/testhistory?v···rt=m&p=5

It's graphing now.

reply to Oblivions Ex
Oblivious, just remember that Verizon uses Dynamic IP addresses for residential circuits, unless the policy is different in California. My line monitor due to the fact that my connection has a Dynamic IP is actually tied to a Dynamic DNS, that way my IP address will update accordingly. I'm sure you've done that, but if you have a router managing the DynDNS, it needs to be the router holding the public IP provided from Verizon.
--
This is a signature, eaten by spring.