US Telco Support → Verizon → Verizon DSL > Verizon DSL Line Monitors - Free

Re: Verizon DSL Line Monitors - Free

How do I stop the test?

Go here: »/monitored/mine

The select "edit". On the next page at the bottom is a button for "Stop Monitor" That will delete your Line Monitor.

Do you also need for me to take you out of that group? If so let me know and I will do that. If you are going to another ISP that would be a good idea.
--
TH ~ NE ~ EPN ~ NC ~ TD

Invite sent, Poorfellow.

Invite sent to genepool.

Invite sent to snowballhush.

Invite sent to Meez.

Invite sent to Packeteers.

Invite sent to MajorG1.

Invite sent to Demonfang.

Invite sent to HawaiianSon.

Invite sent to Rockafella21.

Invite sent to icebreather6.

Invite sent to wdufresne.

Invite sent to octal33.

I use Kaspersky pure 2.0 it is not on the list to make pingable. I would like to be in the group as this past week my dsl has gone to hell my uploads are fastest test 29 kbps most test fail on the upload.

I don't use Kaspersky so I don't know how you would make it pingable. Sorry.

Would you still like me to send you an invite so that you can see if the line monitor would still work for you?
--
TH ~ NE ~ EPN ~ NC ~ TD

Yes send me an invite. I will try to find out seems like no one has info on Kaspersky firewalls.

Invite sent, hedyd4u.

No longer need to be in the group I have fired verizon and will be getting time warner thanks.

Kicked from the group.

Invite sent to princedwi.

Is there still actvity underway to get the monitors working again for dynamic IP addresses?
My DSL changed IP address and the monitor still has not picked up the new IP address after about 6 days. Status is showing "no data available to draw graph"
--
The difference between genius and stupidity is that genius has its limits.

Just edit your line monitor settings and update your public IP address. Make sure you also have the "Dynamic IP" box checked. Then click on update monitor at the bottom of the page to save.

There was some glitches during the move.

»Topic for site switch-to-new-servers glitches

»DeeEnEs - Unknown Error

Thanks,

So you need to "seed" the tool with your public IP address first? and then it should track any changes?

I put my dyndns address in earlier today and left the static IP box empty. After 4 hours it had not updated.

This is the problem I saw earlier: when my public IP changed, the site tool did not pick up the new one.

I just manually seeded the IP address box, will wait for the monitor to start tracing and will force an IP address change to see what happens.

It is tracking now, waiting for an address change......

BTW...The Dyndns seems to be working because if I ping it, my real public IP is resolved.
--
The difference between genius and stupidity is that genius has its limits.

I don't use Dyndns or DeeEnEs so I'm not sure.

I have pointed someone who might be able to help to you.

I know that I shut down my monitor just before the move and after the move I had a heck of a time getting a new monitor to start populating but it finally did so earlier this week.

Yes. You should put your current IP in the static box, check the dynamic box, and put your dyndns hostname in the 'IP from this DNS' box.
--
***ATMFAQ***DIFAQ***Kitchen Sink***

Could the tool be broken again?

I manually entered my IP and dyndns host name, saw it was recording, and forced an IP change. 4 hours later it has not updated. Tag is: basic #252162

Tim
--
The difference between genius and stupidity is that genius has its limits.

I'll ask that it be looked at.

Thanks!

Tim, can you update when this gets sorted out so others will know?