 impala
join:2008-03-08 Clemson, SC
·AT&T Southeast
| reply to impala Re: 327w firewall "state" rule times out in 10sec?!?
Here's what my router's help page says about state:
state Specifies that the TCP/ICMP/IGMP session (particularly the sequence number in the case of TCP and the packet type and source/destination addresses and ports in the case of ICMP and IGMP) associated with this packet will be added to the state table maintained by the filtering engine. As long as that session remains in the state table all packets associated with that session are passed without comparing them to the rules decision tree. The filtering engine state table logic maintains the state of the session with successive packets and closes or times it out (removes it from the state table) whenever appropriate. The bold is my emphasis. This is normal for the state rule, but 10 seconds is not normal. |