logikos
Premium
join:2006-08-26
Hempstead, TX
| Hello,
I would like to use this router as a wireless extension of my wired LAN. I've done the configuration for this with a D-Link and a Linksys in the past with success, but haven't any luck with the ZyXel. I have used the documentation found on this site as the guide.
Setup:
WAN - I leave it at the default (DHCP) since the port will be unused.
LAN - I changed the IP to one that conforms to my LAN's standards but not in the range of the DHCP server on my LAN. Subnet mask matches my LAN. I turn DHCP off.
Wireless - Set up using WEP security.
I reboot on my LAN after config (ethernet cable from X-550 LAN port to my switch). I can see the ZyXel and when I connect it prompts for the key, then connects, but it gets stuck in Acquiring Network Address mode for several minutes, then stops with a No Connectivity.
I've gone through the process like 6 or 7 times. The firmware is v1.6.
What am I missing?
Thanks! |
