http://www.dslreports.com/forum/r20261444 en Tue, 10 Nov 2009 01:06:12 EDT Tue, 10 Nov 2009 01:06:12 EDT http://www.dslreports.com/forum/remark,20261444 cvs : I need some information/help related to ALCATEL 7300 DSLAM.

I see DSLAM being in many of the posts hence posting my query here.

I am trying to bringup ALCATEL 7300 DSLAM but am never able to get the pormpt to login.

The DSLAM has the following cards.
AACU-C, SANT-F, ADLT-N, ABLT-D, ABLT-F and ADLT-L.

LEDs on ADLT-N card has never glown, so I guess this card is not working.

Major and critical LED's on AACU-C are always glowing. Below are the messages printed when connected to the DSLAM. (Term serv is connected to the AACU-C card.

Some of the failures noticed are:

\"Failed to load or find requested software\""

\"Equipment failed self-test\""

I'm not sure how to proceed further.

Any help/poniters in this regard is highly appreciated.

WHen connected to the DSLAM after powering it on below messages are printed:

Serial driver initialized.
Waiting for MIB stability - please be patient
....
MIB is stable, continuing

[;

2 70-01-01 00:04:28
M 0 DENY
ICNC
/* Input, Command, Not Consistent */
/* The command code entered is not a valid command code. */
/* Error in VERB/MOD at position = 0. */
;

r[?6l[?7l[20l[4h[?3l

/* The command code entered is not a valid command code. */
Enter Verb
(ACT, ALW, CANC, CHG, CONN, DISC, DLT, ED, ENT,
FREE, INH, INIT, LOGOFF, OPR, RD, REPT, RESV,
RLS, RST, RTRV, SET, STA, STP, SW, TST) : [;

2 70-01-01 00:04:31
** 1 REPT ALM EQPT
"LT-1-1-4:MJ,EQPT,SA,1-1,0-4-31:\"Equipment failed self-test\""
;



Would you like to establish a prompt login session? (Y, [N]):

2 70-01-01 00:04:28

2 70-01-01 00:04:31
** 3 REPT ALM EQPT
"LT-1-1-1:MJ,PROGVER,NSA,1-1,0-4-31:
\"Failed to load or find requested software\""
;



/* Routing of partial commands is not allowed */



2 70-01-01 00:04:31
M 0 DENY
ICNC
/* Input, Command, Not Consistent */
/* The command code entered is not a valid command code. */
/* Error in VERB/MOD at position = 0. */
;

Would you like to establish a prompt login session? (Y, [N]): t
Please enter either Y or N only.s)e e ICNC

Would you like to establish a prompt login session? (Y, [N]): i s)* Isput, Comma
nd, Not Consistent */ /* The command code entered is not a valid command code.
*/ /* Error in VERB/MOD at position = 0. */; r[?6l[?7l[20l[4h[?3l/* The comm

and the above 10 lines are repeatedly printed.......]]> http://www.dslreports.com/forum/remark,20261444 Tue, 01 Apr 2008 00:04:50 EDT