nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
 ·AT&T Midwest
| reply to gr8scotts
Re: Versalink 327W and Verizon Broadband Access
The bridge setting on the 327w is for the connection between the modem and your ISP. It has nothing to do with what will be going on in your LAN.
Whether to use bridge settings will depend on your ISP. I seem to recall that some verizon regions use PPPoE, while others use DHCP. It the DHCP regions you would set the 327w as a routed bridge. In the PPPoE regions, setup the modem for PPPoE. Your ISP should have told you which you need (or maybe their setup software works it out). |
|
gr8scotts
join:2008-04-14
Pacific, MO
| I'm not sure which settings this region (midwest) uses; would their tech assistance be able to tell me that over the phone or is there somewhere I can look it up? Is that all I would need to do to make the setup work? Thanks for the info so far...  |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL | Tech assistance should know.
While you are on the line, check what you need for VPI and VCI. Those will be numbers, such as 0 and 35. Not sure what verizon uses. |
|
