eots
join:2003-02-04 | Modem setup
There needs to be a FAQ in this forum on the correct modem settings for people who don't buy their modem from TSI. |
|
Bicephale
join:2005-09-24 | Like this one?:
»Re: Updated 516 Guide |
|
dal3934
@bell.ca | except the link in the post you link to is dead... |
|
bryanviper
join:2002-10-12
Toronto, CAN
 ·TekSavvy Solutions..
| reply to eots
Ontario/Quebec - VPI/VCI=0.35
AB/BC - VPI/VCI=0.33
Please connect the modem directly to the PC
Are you connecting directly through the modem or going through a router?
If direct:
open: »192.168.1.254
click Speedtouch
Click Setup
"Welcome to the easy..." - Next
Routed PPP - Next
Enter select VPI/VCI, PPPoE - Next
Enter username/pass - Next
Skip Admin - Next
Start Config
If Router:
Connect direct for config then:
open: »192.168.1.254
click Speedtouch
Click Setup
"Welcome to the easy..." - Next
Bridge - Next
Enter select VPI/VCI - Next
Disable DHCP - Next
Skip Admin - Next
Start Config
__________________
--
Computer: Intel Quad Core, 2gb OCZ DDr2, 2x Plextor Burners, Corsair 620psu, Antec 900Case, 5mb DSL from teksavvy
»www.MaximumRepair.ca |
|
eots
join:2003-02-04 | That's great, but it still needs to be in the FAQ's. |
|
Bicephale
join:2005-09-24 | reply to dal3934
This one still works:
»/profile/646748 |
|
