Mindznorty
join:2007-06-05
Los Angeles, CA
| Elite
Is my speed appropriate for the Elite Package?
Current Rate: 4448 kbs 768 kbs
Max Rate: 4524 kbs 956 kbs
Current Noise Margin: 6.0 dB 11.0 dB
Current Attenuation: 57.3 dB 31.5 dB
Current Output Power: 19.1 dBm 11.9 dBm |
|
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV
| I can't tell. Are those stats from a 2Wire? Is your line on interleaved or fast?
Is this a recently completed upgrade to Elite?
You should check the stats again at your NID to see if they improve dramatically: »AT&T Southeast Forum FAQ »How do I check modem stats, synch rates & speeds at NID - Residential Housin, otherwise, I think your loop is excessively long.
If the stats don't improve at your NID, maybe you can have your POTS circuit transferred to a nearby RT in your neighborhood if one is available. You would have to ask about that in AT&T Direct, the private forum to communicate with AT&T techs with privacy of personal phone info (phone numbers and the like): »/forum/sbcdirect |
|
Mindznorty
join:2007-06-05
Los Angeles, CA
| reply to Mindznorty
It's from 2Wire, been a month from upgrade.
More Current Stats:
DSL Connection Details
DSL Line (Wire Pair): Line 1 (inner pair)
Protocol: G.DMT Annex A
Downstream Rate: 3680 kbps
Upstream Rate: 768 kbps
Channel: Fast
Current Noise Margin: 10.0 dB (Downstream), 12.0 dB (Upstream)
Current Attenuation: 57.3 dB (Downstream), 31.5 dB (Upstream)
Current Output Power: 19.0 dBm (Downstream), 11.9 dBm (Upstream)
DSLAM Vendor Information: Country: {0x0F} Vendor: {ALCB} Specific: {0x00}
PVC Info: 0/35
I dont think I can check my NID stats, I live in an apartment and can't find any INI. |
|
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV
| reply to Mindznorty
You are pretty much too far from the CO DSLAM to get full 6016 speeds? I think from what we have seen so far, any attenuation over about 52.0 dB is too much for Elite speeds (and that value may be lowered with more reports from newly upgraded lines).
Is your sync stable or does it keep dropping/re-syncing?
The techs in Direct may be able improve your stability by setting your line to interleaved mode or you may have to drop back to a Pro speed on your loop to be stable. |
|
finally_dsl
join:2008-05-01
Los Angeles, CA
| said by d_l  :The techs in Direct may be able improve your stability by setting your line to interleaved mode or you may have to drop back to a Pro speed on your loop to be stable. d_l, how can you tell if your line is on interleaved mode or not, assuming Pro and 4100b modem? I can get the stats from modem but how can one tell? Thanks. |
|
tonydi
Premium,MVM
join:2001-05-11
San Jose, CA | Look on the Statistics page and in the first table it'll show next to "Data Path". Or on Line 100 in the Technician's Readout. |
|
finally_dsl
join:2008-05-01
Los Angeles, CA | Oh, so it's either "fast" or "interleaved"? |
|
tonydi
Premium,MVM
join:2001-05-11
San Jose, CA | Or blank if you're down.  |
|
