VeLiduS
join:2008-05-03
Coal City, IL
|  dd-wrt on linksys wrt54g
| |
|
 
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
 ·AT&T Yahoo
| Re: dd-wrt on linksys wrt54g What modem is connected to the router(Brand/Model#)? Does your DSL provider use PPPoE or DHCP? Is the modem itself a combination unit(Modem/Router)?
--
Got a Clark,Crown,Drexel forklift and need technical advice? Ask me about it. | |
|
VeLiduS
join:2008-05-03
Coal City, IL
| i have yahoo sbc dsl . not sure of pppoe dhcp . i set it up on the default router firmware but i dont remember exactly. the modem is a small silver motorola modem that they send out. so the linksys router and motorola modem are seperate not sure of model # . i only see a serial number and modem access code | |
|
 |
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
·AT&T Yahoo
| Re: dd-wrt on linksys wrt54g You have the Motorola/Netopia model #2210-02 modem. Right now,you are using the modem to connect to the internet,via PPPoE on the modem mode,correct?
--
Got a Clark,Crown,Drexel forklift and need technical advice? Ask me about it. | |
|
VeLiduS
join:2008-05-03
Coal City, IL | do dsl modems usually do dhcp or pppoe or does it really depend on the company? im trying to think back weather i had to input sbc yahoo info into the pppoe field cause i see u need a host name and such | |
|
| 
CylonRed
Premium,MVM
join:2000-07-06
Bloom County | Re: dd-wrt on linksys wrt54g It depends on the ISP - I have a static IP from mine for DSL and if I had a normal ip from them it would be DHCP. | |
|
VeLiduS
join:2008-05-03
Coal City, IL
| wow thats deff some research there mountaineer . thx so much. it had been over a year since i even had to look at router setting so i forgot what went down . but yea its pppoe settings and i had to call and get my info from the dsl company. i got it all written down now . but thx so much again. deffinately helped me out | |
|
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
·AT&T Yahoo
| Re: dd-wrt on linksys wrt54g Well,I was going to suggest setting the router WAN IP address to a Static setup. I personally used this setup,when I had the SpeedStream 5100b modem,and it worked very well. The setting are a little different between the SpeedStream(4100,4100b,5100b) and the Motorola(2210-02),but it works the same way.First,change the default LAN IP address of the router from 192.168.1.1 to 192.168.X.1(X being any number between 2 to 254). Make sure you change the third octet,and not the fourth.
The router's WAN IP address would be as follows,
IP:192.168.1.64
Subnet Mask:255.255.255.0
Gateway IP:192.168.1.254
DNS Servers
68.94.156.1
68.94.157.1
--
Got a Clark,Crown,Drexel forklift and need technical advice? Ask me about it. | |
|
| | VeLiduS
join:2008-05-03
Coal City, IL | Re: dd-wrt on linksys wrt54g now im wondering something else . whats the differnece between the pppoe setup and this new 'static' setup i use. why does static seem to work better then the pppoe? | |
|
VeLiduS
join:2008-05-03
Coal City, IL
| Hey mountaineer its me again =D.
so yea i was using the setting that i finally got to work last time . and yesterday everything was lagging all to heck so i wanted to reset the modem cause it stays on for days on end and i unplugged it plugged it back in and yea lost the i net. couldnt get it working. everything was the same from when i got it working the first time . so i came back here and saw your second suggestion. and it worked and again i just want to thank the heck outa u . i think ill be sticking with these settings now . again thank you for your help =) | |
|
|
|
|
