Re: Need help to configure 1841 router and asa 5505 firewall in Virtual Private Networking http://www.dslreports.com/forum/r20434829 en Fri, 09 Jan 2009 04:47:45 EDT Fri, 09 Jan 2009 04:47:45 EDT Re: Need help to configure 1841 router and asa 5505 firewall http://www.dslreports.com/forum/remark,20855787 chauamp : 1) I'm using xDSL (Netgear 802.11 N)
2) I don't have a static ip address for WAN port but there is a way where I can know when the public ip address change.
3)Yes
4)I'm certified with CCNA.

I have a few equipments at home that I'm playing with.]]> http://www.dslreports.com/forum/remark,20855787 Sun, 27 Jul 2008 09:17:23 EDT Re: Need help to configure 1841 router and asa 5505 firewall http://www.dslreports.com/forum/remark,20438394 DocLarge : You'd be better off asking this question in the cisco forum because setup is your major issue before even getting to vpn configuration. But since you've asked...

What is your level of experience configuring Cisco?

Here are a few starter questions:

1) Are you using cable or xDSL?
2) Do you have an ip address on the WAN port?
3) Do you know how to check to see if you are getting an IP?
4) Do you know how to configure Cisco IOS?

If you have nevered configured Cisco IOS (no other way to put it) this will be "arduous" unless you use the "security device manager" (SDM Gui interface) which makes it easier to follow for people new to Cisco (good move on Cisco's part).

These are the basic questions that need to be answered prior to offering any answers so we know exactly where you are in this adventure :)

Jay]]> http://www.dslreports.com/forum/remark,20438394 Tue, 06 May 2008 06:29:33 EDT Re: Need help to configure 1841 router and asa 5505 firewall http://www.dslreports.com/forum/remark,20434829 anon :
quote:
The 1841 router came equipped with 1 dsu/csu t1 v2 port which I would like to use to connect to one of the netgear wireless port
Is there a typo or error in this sentence? A t1 port is a serial port meeting specific signal characteristics and is wired to the line providing T1 service. A wireless port is just that - wireless. You need to connect one of the FastEthernet ports on the 1841 to an ethernet port on the switch built into the Netgear. Or add a wireless card to the 1841.

You also mention you have an ASA. Where do you want to use that? It sounds like you wish to use the netgear to access the Internet. Could you include a diagram showing exactly what you want to do?]]> http://www.dslreports.com/forum/remark,20434829 Mon, 05 May 2008 14:24:48 EDT Need help to configure 1841 router and asa 5505 firewall http://www.dslreports.com/forum/remark,20409274 chauamp :
Hi all,

Can anybody help me with this problem? I have a 1841 router, asa5505 firewall and a netgear wireless router model WNR834Bv2. The 1841 router came equipped with 1 dsu/csu t1 v2 port which I would like to use to connect to one of the netgear wireless port to access the internet. Within my network, I have a dns server running and exchange server running but can't access the internet yet. I want to hookup the router, firewall and the netgear wireless router in order to access the internet as well as setup for remote access vpn. Moreover, I want to establish NAT or PAT on the router as well. Anyone has any idea? please help me out.

Thanks

chauamp]]> http://www.dslreports.com/forum/remark,20409274 Wed, 30 Apr 2008 03:30:50 EDT