CCat
Purrplexity
Premium
join:2005-12-06
Wonderland
 ·RoadRunner Cable
·WOW Internet and C..
| [OC] OC Wont retain FSB settings
My computer has been running at 3.6 doing fine. I tried a screen capture program which didnt work well. I uninstalled it which didnt go real smooth. My system rebooted on its own and the bios stated update success but I didnt change any settings.
I went back to the bios and made sure all the settings were OK then saved to CMOS and exited. CPUZ still showed my CPU at 2.4 with a 266 FSB. I powered down and cleared the CMOS. Made sure my settings in the bios were right and saved. Boot screen showed update success. Still wont OC stays at std speed. Vcore shows the increase and ram settings are good.
Heres what I have for settings:
Robust graphics adapter.....Auto
CPU clock ratio.............9X
CPU host clock control......Enabled
CPU host frequency..........400
PCI express frequency.......100
C.I.A.2.....................Disabled
Performance enhanced with...Std
System memory multiplier....2.0
DRAM timing table...........Manual
Std timing control..........4
CAS latency time............4
DRAM Ras to CAS delay.......4
DRAM RAS precharge..........4
Precharge delay.............12
Ram is originally 5 5 5 18
Advanced timing control.....All auto
System voltage control......Manual
DDR2 overvoltage control....+.30
PCI-E overvoltage control...Normal
FSB overvoltage control.....+.35
(G)MCH overvoltage control.+.30
Loadline calibration.......Enabled
CPU voltage control........1.35
Limit CPUID max to 3.......Disabled
No execute memory protect..Enabled
CPU enhanced halt (CIE)....Disabled
CPU thermal monitor........Enabled
CPU EIST function..........Disabled
Visualization technology...Disabled
Any help would be much appreciated as it is driving me CRAZY.
--
Graphics Playground |
|
Sc0tt
Kneedragger
Premium
join:2000-11-13
Stockholm, NJ | what hardware you running?
mobo
ram
cpu |
|
CCat
Purrplexity
Premium
join:2005-12-06
Wonderland | The mobo is a Gigabyte GA P35 DS4 with F11 bios
Ram is 8GB (4x2GB) Corsair XMS2 6400C5DHX
CPU is Intel Q6600 Quad
--
Graphics Playground |
|
signmeuptoo
Mike Bloomberg 4 President
Premium
join:2001-11-22
Tardis in TN
clubs:  | reply to CCat
reflash BIOS maybe, and with something newer if there is such a thing. But first try a long time period CMOS reset. Leave the jumper in place for a few hours WITH THE POWER SUPPLY TURNED OFF!!! |
|
Gooiool
May God bless you.
Premium
join:2006-11-27
Roland, OK
clubs:
·Cox HSI
| reply to CCat
CPU host clock control......Enabled
That's been my pain or ( thorn in the past )forgetting to Enable CPU host clock control.
Also What Version is your MB 2.0 just wondering ?
--
Team DiscoveryJoin us help fight cancer.
Gooiool©2005 My Photo Site |
|
CCat
Purrplexity
Premium
join:2005-12-06
Wonderland | Rev 2.1 |
|
CCat
Purrplexity
Premium
join:2005-12-06
Wonderland | reply to signmeuptoo
I left the battery out last night and set everything this morning. Checked CPUZ and all is well in OC land. Thanks for the info.
--
Graphics Playground |
|
