Re: Need 1.93 firmware for SMC 7004BR

Author	All Replies
badcrc0 join:2002-03-22 Bremerton, WA	reply to slumpack Re: Need 1.93 firmware for SMC 7004BR Thanks for the verification slumpack. I also wanted to add that one of the reasons I wanted the new firmware was to increase my WAN throughput. I was topping off at about 4.5mbit when my ISP actually has 8mbit. After the 1.96h3 firmware update I'm almost getting 7mbit.
badcrc0 join:2002-03-22 Bremerton, WA	to forum · permalink · · 2008-05-08 11:45:03 ·
systems2000 What? You Say It's Fixed. Hah join:2001-11-29 Cyberspace ·Embarq	I also noted that I was having issues with my Barricade on a Comcast connection, after they went from 3.0 MB to 6.0MB. The 6.0 MB connection was also constantly locking up the Barricade to the point where I would have to do a soft reset weekly. Personally, I was very happy with the 3.0 MB connection. I'm no longer with Comcast due to their Blackmailing and the lousy CATV service and excessive costs. Does this work with the 7004ABR units also? -- Personal Theme Song: RUSH - Mystic Rythms from Power Windows. Rush Radio Website
	to forum · permalink · · 2008-06-03 22:22:38 ·
badcrc @wavecable.com	said by systems2000 : Does this work with the 7004ABR units also? I couldn't say. If any of those firmwares work on the ABR then the procedure should work. Read the thread I referenced in my original post, I think someone mentioned the compatible routers.
badcrc @wavecable.com	to forum · permalink · 2008-06-03 22:58:32 ·


Thursday, 08-Jan 01:36:03	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 9 years online! © 1999-2009 dslreports.com. page compression OFF