Re: MLPPP on WRT54G/Tomato, progress report (with download)

Author	All Replies
An Onymous @teksavvy.com	reply to DSL_Ricer Re: MLPPP on WRT54G/Tomato, progress report (with download) Nice work guys! Also there seems to be quite a bit of activities (16+ pages of long discussions) on Dual WAN and beyond over at DD-WRT forum too. It is mostly scripts with routing traffic and no mlppp. »dd-wrt.com/phpBB2/viewtopic.php?···54f2704c Rumor has it is that multiple wan trunking is being worked on for V25 release. »dd-wrt.com/phpBB2/viewtopic.php?···54f2704c Thankfully, there is a bit of headroom in the WRT hardware. The following is old v23 SP2 in WRT54G v3.1/GL benchmark, but still interesting read: »dd-wrt.com/phpBB2/viewtopic.php?···54f2704c Ethernet switch alone:70 Mbit/s NAT: 30 Mbit/s (GL), 21 Mbit/s (G v3.1) PPPoE + NAT: 23Mbit/s (GL) RP-PPPoE + NAT: ≈ 6 Mbit/s (GL) WLAN (WPA2) : 24 Mbit/s PPPoE + NAT + WLAN (WPA2): 16Mbit/s at least (GL, see below) RP-PPPoE + NAT + WLAN (WPA):4.6 Mbit/s (GL) Don't worry too much about GPL at this early stage as long as you guys are intending to provide source to the Tomato project.
	to forum · permalink · 2008-05-08 18:51:12 ·
Guspaz Guspaz Premium,MVM join:2001-11-05 Montreal, QC kudos:16	said by An Onymous : Nice work guys! Also there seems to be quite a bit of activities (16+ pages of long discussions) on Dual WAN and beyond over at DD-WRT forum too. It is mostly scripts with routing traffic and no mlppp. »dd-wrt.com/phpBB2/viewtopic.php?···54f2704c Rumor has it is that multiple wan trunking is being worked on for V25 release. »dd-wrt.com/phpBB2/viewtopic.php?···54f2704c Thankfully, there is a bit of headroom in the WRT hardware. The following is old v23 SP2 in WRT54G v3.1/GL benchmark, but still interesting read: »dd-wrt.com/phpBB2/viewtopic.php?···54f2704c Ethernet switch alone:70 Mbit/s NAT: 30 Mbit/s (GL), 21 Mbit/s (G v3.1) PPPoE + NAT: 23Mbit/s (GL) RP-PPPoE + NAT: ≈ 6 Mbit/s (GL) WLAN (WPA2) : 24 Mbit/s PPPoE + NAT + WLAN (WPA2): 16Mbit/s at least (GL, see below) RP-PPPoE + NAT + WLAN (WPA):4.6 Mbit/s (GL) Don't worry too much about GPL at this early stage as long as you guys are intending to provide source to the Tomato project. I assume RP-PPPoE refers to using rp-pppoe.so with PPPd (which is how we're doing it)... I find it questionable that it would only be able to do 4.6mbit/s with WPA (or 6mbit without), but we'll have to see for ourselves. I find it difficult to believe that pppoecd is that much less efficient than pppd. I don't know if we intend to provide the source to the Tomato guy; he has shown no interest to date in communication, and I don't intend to go out of my way to get in touch with him. We'll post the source, surely, and maybe even send him an e-mail, but I'm not going to pester him to notice my existence.
	to forum · permalink · 2008-05-08 21:23:44 ·
An Onymous @teksavvy.com	That is a very old post (2006), so RP-PPPoE they are refering to is 2004. Hopefully, they have improve it since. On page 2 of the link: >Regarding the rp ppoe module... >DD-wrt use PPPoE Version 3.5, Copyright (C) 2001-2006 Roaring Penguin Software Inc. >rp pppoe 3.5 is very very old... (It was released Almost 2 years ago)
	to forum · permalink · 2008-05-08 22:10:01 ·

O Canada! > Canadian > TekSavvy > MLPPP on WRT54G/Tomato, progress report (with download)