www.broadbandreports.com
  
Search:  

 
   AllHot TopicsCable SupportTelco SupportHardware etcSecurityClubsGallery»»






how-to block ads


 
Forums » Up and Running » Networking » Any way to set a "Hard" Cap with router?
 
Search Topic:
  Social:
topic feed
 
Posting
toggle:
flat / full
normal / watch
Post a:
Post a:
How do I determine subnet manually? »
« [Windows] Can a router take its public IP address from the priva  
AuthorAll Replies

SpeedZ

join:2008-04-12

Any way to set a "Hard" Cap with router?

Does anyone know how to set a "Hard" cap with my router. Let's say I set the cap at 10GB. Now, when someone uses up to 10GB of bandwidth, they get their connection cut off until the next month comes or something.

Is their any router that is capable of doing this? I really like the WRT54G line of routers but I'm reluctant to buy since I am not sure if they have this feature. The QOS feature is nice but it's not good enough for me because my connection is consistently exceeding 60GB which is the bandwidth cap that Shaw imposes so I get a lot of disconnections. I want to set a hard cap so I don't reach over that limit.

Thanks

daveinpoway

join:2006-07-03
Poway, CA

The Netgear FVX538v2 will do this:



NETGEAR ProSafe VPN Firewall FVX538





| Network Configuration | Security | VPN | Administration | Monitoring | Web Support | Logout |




:: Router Status :: Traffic Meter :: Diagnostics :: Firewall Logs & E-mail :: VPN Logs ::



WAN1 Traffic Meter WAN2 Traffic Meter

Traffic by Protocol



Enable Traffic Meter help



Do you want to enable Traffic Metering on WAN1?
Yes No


No Limit
Download only
Both Directions
Monthly Limit: (MB)
Increase this month limit by: (MB)
This month limit: 0(MB)


Traffic Counter help When Limit is reached help


Restart Traffic Counter Now
Restart Traffic Counter at Specific Time
: on the day of Month.
Send e-mail report before restarting counter

Block All Traffic
Block All Traffic Except E-Mail
Send e-mail alert


Internet Traffic Statistics help


Start Date / Time:
Outgoing Traffic Volume: (MB)
Incoming Traffic Volume: (MB)
Total Traffic Volume: (MB)
Average per day:
% of Standard Limit:
% of this Month's Limit:



2007 © Copyright NETGEAR®

SpeedZ

join:2008-04-12

edit:
May 9th, @10:08AM

reply to SpeedZ
All you do with this Router is plug it in and operate it in like a normal router right? Even though it says VPN router... right?

Also, is their any wireless routers that have this feature. I can't find it.


Anav
Sarcastic Llama? Naw, Just Acerbic
Premium
join:2001-07-16
Dartmouth, NS

Isn't that a tad harsh!!

What is the real requirement? Perhaps to stop others from hogging bandwidth so its available to others. Perhaps you want to limit throughput maximums while using the net as opposed to the cap idea.

I would be sorely pissed if I did not have access to my email because some numbskull is using a netgear router!
--
Ain't nuthin but the blues! "Albert Collins".
Leave your troubles at the door! "Pepe Peregil" De Sevilla. Just Don't Wifi without WPA, "Yul Brenner"

LlamaWorks Equipment

SpeedZ

join:2008-04-12


edit:
May 9th, @08:42PM

said by Anav See Profile :

Isn't that a tad harsh!!

What is the real requirement? Perhaps to stop others from hogging bandwidth so its available to others. Perhaps you want to limit throughput maximums while using the net as opposed to the cap idea.

I would be sorely pissed if I did not have access to my email because some numbskull is using a netgear router!
I would think that he would be pissed but heck, the culprit is downloading via P2P or Rapidshare or something every single hour of the day. Internet is intolerable! He downloads before he goes to work. He downloads after he comes home from work. We tell him to download at nighttime ie. 10-8 and he says yes for like 2 days and he goes back to his old routine.

Now, I exceed Shaw's bandwidth. In fact, I double it and Shaw's pissed so they tell me to stop exceeding or they'll cut me off. And I'm pissed because my internet is slow like crap and disconnects like every single hour and we're sharing the internet bill.

This is why I want the cap router. I can just set the culprit to 10GB while everyone else get's unlimited. And if I catch them using over 10GB, i'll just limit them. Since 10GB is a lot. If he doesn't like it, fine, he can go get his own line. He needs to buy the modem and everything because they're all mine. And this gives me a reason to switch to Teksavvy.

[edit] What do you suggest?

daveinpoway

join:2006-07-03
Poway, CA
reply to SpeedZ
Yes, you can use it like a "normal" router. If you don't need it, you are not forced to use the VPN feature.
Forums » Up and Running » NetworkingHow do I determine subnet manually? »
« [Windows] Can a router take its public IP address from the priva  

Most commented news this week
· [154] Comcast Van Race Injures 3-Year-Old
· [100] EA Scales Back 'Internet Required' DRM
· [82] Sprint Hemorrhaging Wireless Subscribers
· [75] ISPs To Start Booting More P2P Users
· [75] Mozilla Considering Opt-In Browsing Tracking
· [70] Canadian Regulators Deny Relief For Bell Canada Traffic Shaping
· [58] Baby Bell Neglect of Vanilla DSL Could Spell Trouble
· [58] Cable Beats Phone Companies for New Internet Subscriptions
· [54] Missouri University Makes Kids Take Copyright Quiz To Use P2P
· [52] An Inside Look At RIAA DMCA Letter Generation
Sunday, 18-May
06:29:16
Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
8th year online! © 1999-2008 dslreports.com.
page compression OFF