redblkjck
Premium
join:2001-11-07
Sanford, NC
| reply to bluedrakonis
Re: Server problem
If you go through the bridge mode that way, no change is needed. Only if you create a new device connect on the modem do you need to change those numbers. It is currently set to 35 under the default setup and the default setup is dual mode.
Are you getting a connection/IP with the router doing the PPPoE? The netgear still needs to be setup to fwd http service to your XP Apache box. This is normally under a rules section of the netgear. Forward port TCP 80 to the internal IP of your XP IP. Normally you do not need to enter DNS info in bridged mode. You just enable require user/paswd log in, PPPoE, obtain DHCP/DNS from provider.
|
