orange
I love oranges
Premium
join:2008-04-16
Tucson, AZ
 ·Qwest.net
·XMission
 ·Comcast
edit:
May 14th, @12:20AM
| reply to badchad
Re: DSL Modem
If you're looking for reliability, I would suggest a Cisco 678. Note that it does require a serial management cable. I bought my 678 on eBay for about $70 and a serial cable was included. If you don't have a serial port on your computer (I have an iMac which doesn't have one) you can use a USB-to-serial converter. (These cost about $20.) Luckily I already had one.
You need to use the complicated Cisco commands to configure it. Luckily Qwest's site has instructions on doing it all:
»www.qwest.com/internethelp/modem···gdynamic
Also, Qwest may tell you the Cisco 678 is not supported. See the FAQ here: »US West/Qwest DSL »Cisco 678 - Does it work with the current Qwest DSL offerings?. It works fine on current Qwest DSL offerings, no matter what Qwest CSRs may say.
Edit: Forgot to mention, the Cisco 678 (and IIRC none of the modems that have been suggested in this thread) will not work with the ADSL2+ offerings. These are the 12mbps/20mbps offerings and are only available in a limited footprint. |
|
AthlGrond
Premium,MVM
join:2002-04-25
Aurora, CO
·Comcast
| said by orange  :Edit: Forgot to mention, the Cisco 678 (and IIRC none of the modems that have been suggested in this thread) will not work with the ADSL2+ offerings. These are the 12mbps/20mbps offerings and are only available in a limited footprint. Thanks for mentioning that orange , I've updated that FAQ that you linked with the ADSL2+ info. You are correct the 678 will not support ADSL2+ (a standard that didn't exist when the last firmware update for the modem was made).
The 678 that we use here at the office is still chugging along 100% trouble free for the last 4 years. 
--
"You are technically correct. The best kind of correct." -Bureaucrat 1.0 |
|
