[HELP] cisco 3640 in Cisco

[HELP] cisco 3640 in Cisco http://www.dslreports.com/forum/r20479365 en Fri, 10 Oct 2008 14:50:16 EDT Fri, 10 Oct 2008 14:50:16 EDT Re: [HELP] cisco 3640 http://www.dslreports.com/forum/remark,20504229 mr_dirt : Where on the network do you observe the high ping response times?

If your ping times are very high, how do you expect SNMP to work well?]]> http://www.dslreports.com/forum/remark,20504229 Sun, 18 May 2008 23:26:17 EDT Re: [HELP] cisco 3640 http://www.dslreports.com/forum/remark,20503984 lauren198 : oOo...
ic ic...
thanks for your explain.. :)
do u have any solution for my problems?

thanks before for your reply.. :D

best regards,

lauren]]> http://www.dslreports.com/forum/remark,20503984 Sun, 18 May 2008 22:35:41 EDT Re: [HELP] cisco 3640 http://www.dslreports.com/forum/remark,20496795 TomS_ :

said by lauren198

:

"ip cef"???

what is "ip cef"?? n what for?

In a nutshell, it makes a lot of things work a lot better, and without it, routing performance is severely impacted.]]> http://www.dslreports.com/forum/remark,20496795 Sat, 17 May 2008 03:19:30 EDT Re: [HELP] cisco 3640 http://www.dslreports.com/forum/remark,20490636 lauren198 : "ip cef"???

what is "ip cef"?? n what for?

i have set that to my router. ("IP CEF" is the default for 12.4-16")
this's my router configuration:

Building configuration... Current configuration : 2613 bytes!version 12.4service timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname gw2!boot-start-markerboot-end-marker!enable password 7 xxxxxxxxx!no aaa new-modelclock timezone gmt 7!!ip cef!!interface Loopback0 description ** LOOPBACK ** ip address xx.xx.xx.xx 255.255.255.255!interface Ethernet3/0 full-duplex!interface Serial3/0 no ip address encapsulation frame-relay IETF frame-relay lmi-type ansi!interface Serial3/0.1 point-to-point ip address xx.xx.xx.xx 255.255.255.252 frame-relay interface-dlci 100!interface Ethernet3/1 ip address xx.xx.xx.xx 255.255.255.224 full-duplex!router bgp 24519 no synchronization bgp router-id xx.xx.xx.xx bgp cluster-id 3411220721 bgp log-neighbor-changes network 203.83.24.0 mask 255.255.248.0 neighbor LA peer-group neighbor LA remote-as 4800 neighbor LA description ** BGP PEER to LA ** neighbor LA ebgp-multihop 255 neighbor LA update-source Loopback0 neighbor LA version 4 neighbor LA soft-reconfiguration inbound neighbor LA weight 45000 neighbor LA filter-list 46 in neighbor LA filter-list 36 out neighbor MARS peer-group neighbor MARS remote-as 24519 neighbor MARS description ** BGP PEER to MARS AS24519 ** neighbor MARS version 4 neighbor MARS soft-reconfiguration inbound neighbor MARS weight 50000 neighbor xx.xx.xx.xx peer-group LA neighbor xx.xx.xx.xx peer-group MARS neighbor xx.xx.xx.xx peer-group MARS no auto-summary!

best regards,

lauren
]]> http://www.dslreports.com/forum/remark,20490636 Thu, 15 May 2008 23:39:24 EDT Re: [HELP] cisco 3640 http://www.dslreports.com/forum/remark,20485589 TomS_ : Do you have CEF enabled?

Look for "ip cef" in your config.]]> http://www.dslreports.com/forum/remark,20485589 Thu, 15 May 2008 06:13:18 EDT [HELP] cisco 3640 http://www.dslreports.com/forum/remark,20479365 lauren198 : dear all,

i've cisco router 3640. that's implement to 1Mbps BW.
i've some problems, i need your help..
1. i get a high ping times to my cisco 3640 if it work and sometimes get no response(router host).
2. the snmp service is work, but it will no response for a few seconds (geting error).

this is my cisco 3640 resources:

Ping Result:

SNMP Result:
»img160.imageshack.us/img160/476/···9.th.png

please help me to solve my problem.. thanks before.. :) :)

best ragards,

lauren]]> http://www.dslreports.com/forum/remark,20479365 Wed, 14 May 2008 02:06:05 EDT