 Phraxos Premium join:2004-06-12 UK
| reply to onebadmofo Re: Need a replacement fan
From experience I can tell you that some fans are made specifically for Cisco. If I remember correctly (and I may well not!) the 1760 uses the same fan as the 2950 switch and you can't buy these.
Look for as close a replacement as you can find (voltage, power, pulse lead). You are unlikely to find something as powerful as the Cisco fan but you should be able to find something that will do. |
|
  onebadmofo Repost These Nuts In Your Mouth. Premium join:2002-03-30 Reading, PA
| said by Phraxos :From experience I can tell you that some fans are made specifically for Cisco. If I remember correctly (and I may well not!) the 1760 uses the same fan as the 2950 switch and you can't buy these. Look for as close a replacement as you can find (voltage, power, pulse lead). You are unlikely to find something as powerful as the Cisco fan but you should be able to find something that will do. Jesus...why does this have to be so hard? Well thanks for the heads up. I'll keep searching. |
|
  cow116 Cisco Kid Premium join:2003-03-10 Carmel, IN clubs:  | i had to go on ebay to get replacement fans for my 2900 and 2950 |
|
  sporkme drop the crantini and move it, sister Premium,MVM join:2000-07-01 Budd Lake, NJ
| reply to onebadmofo said by onebadmofo :Jesus...why does this have to be so hard? It doesn't. 
Custom-shmustom, it's a friggin' fan. If you get the right voltage and size and the CFM is the same or more, you really don't have anything to worry about.
I'd head on over to the electronics forum here, they're going to know good sources.
Off the top of my head, I'd say if you can't find it at Mouser, I'll eat my shoe.
»www.mouser.com/
Is there anything more to the part number after the 4020? Do you have a picture you can post? |
|
  onebadmofo Repost These Nuts In Your Mouth. Premium join:2002-03-30 Reading, PA
edit: May 14th, @08:14PM
| I'll take my camera in to work with me tomorrow and take a pic of it.
I believe the whole number is 4020-5lb
Edit==HA!! Mouser worked like a charm. There it is. Thank you so much! 

|
|