AP 1231G-A-K9 No User Mode

Author	All Replies
elegua join:2006-08-30	AP 1231G-A-K9 No User Mode Hi Guys, I'm having problem with this AP, it power on and start with the boot process but i cannot get the User mode, i press enter several times and nothing happen, This is my first time with one of these and i don't know if something is wrong with it or i need to do something else, i assigned a static IP 192.168.5.4 using DHCP, also i cannot access through web either, this is all i got, after all i got is a flashing bar and that's it: Xmodem file system is available. flashfs[0]: 147 files, 7 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 5001728 flashfs[0]: Bytes available: 2739712 flashfs[0]: flashfs fsck took 13 seconds. Reading cookie from flash parameter block...done. Base ethernet MAC Address: 00:19:e8:8c:87:f9 Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Loading "flash:/c1200-k9w7-mx.123-8.JEC1/c1200-k9w7-mx.123-8.JEC1"...################################################################################## ############################ File "flash:/c1200-k9w7-mx.123-8.JEC1/c1200-k9w7-mx.123-8.JEC1" uncompressed and installed, entry point: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)JEC1, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Mon 24-Mar-08 09:51 by pwade Image text-base: 0x00003000, data-base: 0x00699B60 Initializing flashfs... flashfs[1]: 147 files, 7 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7741440 flashfs[1]: Bytes used: 5001728 flashfs[1]: Bytes available: 2739712 flashfs[1]: flashfs fsck took 2 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. [Output cut] cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision A0) with 15138K/1236K bytes of memory. Processor board ID FOC10453LJP PowerPC405GP CPU at 196Mhz, revision number 0x0145 Last reset from power-on 1 FastEthernet interface 1 802.11 Radio(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:19:E8:8C:87:F9 Part Number : 73-8704-13 PCA Assembly Number : 800-23211-13 PCA Revision Number : B0 PCB Serial Number : FOC10453LJP Top Assembly Part Number : 800-23304-13 Top Assembly Serial Number : FTX1048E10Z Top Revision Number : B0 Product/Model Number : AIR-AP1231G-A-K9 Press RETURN to get started! Mar 1 00:00:04.080: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed Mar 1 00:00:05.280: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 Mar 1 00:00:07.373: %SYS-6-LOGGERSTART: Logger process started Mar 1 00:00:07.375: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up Mar 1 00:00:08.375: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up Mar 1 00:00:16.380: AUTOINSTALL: FastEthernet0 is assigned 192.168.5.4 Mar 1 00:00:26.457: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down Mar 1 00:00:27.457: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down Mar 1 00:00:30.597: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)JEC1, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Mon 24-Mar-08 09:51 by pwade Mar 1 00:00:30.597: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start Mar 1 00:00:31.549: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up Mar 1 00:00:39.682: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.5.4, mask 255.255.255.0, hostname ap I appreciate any help. Thanks in advance. ;) ;)
elegua join:2006-08-30	to forum · permalink · · 2008-05-21 18:39:34 ·


Saturday, 06-Sep 02:23:26	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 9 years online! © 1999-2008 dslreports.com.republican-creole page compression OFF