 TilhasBBFormally Goden99Premium
join:2000-08-05
canada | reply to DSL_Ricer
Re: Tomato/MLPPP released (evade throttle or bond two DSL lines) Multilink status report is not live. If one connection is disconnected it still shows 2/2 and internet wont work with new beta. |
|
| said by TilhasBB:Multilink status report is not live. If one connection is disconnected it still shows 2/2 and internet wont work with new beta. It takes 80 seconds for it to detect a failed link. Did you wait that long? |
|
TilhasBBFormally Goden99Premium
join:2000-08-05
canada
1 edit | nope.
is there a way to lower that number? is internet suppose to work if link is dropped? |
|
| said by TilhasBB:nope. is there a way to lower that number? At the moment no, I may add it.
However, one doesn't want it too low: if the modem reboots, the connection will keep on working as normal once it's back up. That could be less painful then the alternative.
said by TilhasBB: is internet suppose to work if link is droped? That depends on what you mean by work. Here's a simulated failure:
64 bytes from 206.47.37.1: icmp_seq=11 ttl=243 time=42.2 ms
64 bytes from 206.47.37.1: icmp_seq=12 ttl=243 time=61.3 ms
64 bytes from 206.47.37.1: icmp_seq=84 ttl=242 time=64049.5 ms
[...]
Teksavvy also has to recognize a failure, because for some reason MLPPP didn't plan for allowing one link to indicate that another has failed. That's why 84 took 64 seconds to arrive (I believe).
If you feel this could be better handled, please feel free to make concrete suggestions. |
|
TilhasBBFormally Goden99Premium
join:2000-08-05
canada | I just tested it. Your correct a little while after it syncs connection is reestablished.
I tested 2 x 6 Meg Links on WRT54GL clocked at 200Mhz and its able to do 1.0Megs/sec. The WRT54GL can be clocked to 240mhz with no cooling just open case. |
|
gord27
join:2005-05-01
Mississauga, ON | said by TilhasBB:I tested 2 x 6 Meg Links on WRT54GL clocked at 200Mhz and its able to do 1.0Megs/sec. The WRT54GL can be clocked to 240mhz with no cooling just open case. i've been using it for a few days now with 2x6meg and it seems to work just fine. i can dl solidly on utorrent at about 1.2mb/s.
that said, how do you overclock it? i've seen people mention it but i'd love to know how it's done. |
|
TilhasBBFormally Goden99Premium
join:2000-08-05
canada
3 edits | nvram set clkfreq=XXX
nvram commit
reboot
But you can only go certain speeds.
»www.bitsum.com/openwiking/owbase···p?WRT54G
»wiki.openwrt.org/OpenWrtDocs/Cus···clocking
Word of Warning! I am not responsible for anyone who bricks their routers ! I've seen some lock up at 216mhz.
I am lucky and mine is clocking very high but I took it out of the plastic case and its well ventelated in my cool basement.
I just found out you can add an SD/MMC card to router...
»wiki.openwrt.org/OpenWrtDocs/Cus···ware/MMC |
|
