pokesph
It Is Almost Fast
Premium
join:2001-06-25
Sacramento, CA
clubs: | reply to marti
Re: Fix for ugly DSL filter hanging in middle of wall?
Just plug the filter into the phone, then the phone line wire into it and to the wall jack. Not too hard of a fix. |
|
c4junk
Premium
join:2004-05-08
| reply to nwrickert
said by nwrickert  :Best solution is to install a whole house filter (POTS filter, NID filter), and run a separate unfiltered line direct from the NID to your modem. This what I did 5 years ago, used red/green for voice and yellow/black for dsl(or on newer wiring blue/white for voice and whatever for dsl) and got a wall plate with 2 phone jacks, works great, have a 2 story house 4 phones (1 a 3 handset wireless) and never a problem. |
|
Airwolf7
Premium
join:2004-12-12
Franklin, KY
 ·AT&T Southeast
1 edit | reply to wayjac
said by wayjac :Recently I assisted a new user with a install the self install kit was a 2wire kit it did not contain a wall mount filter, the quick install guide had a 1-800 number to call to request a wall mount filter. Is a wall mount filter included with the Motorola 2210 self install kit Wayjac, In the AT&T Southeast region the 2Wire Wireless Gateway comes with a self-install kit that contains 4 2Wire phone filters. 3 2Wire phone filters, 1 2Wire phone filter with an ADSL convenience jack, and no wall filter. There is a sheet of paper in the kit telling you to go here www.bellsouth.net/filters if you need to order a wall filter.
The Motorola 2210-02-1006 that we get in the AT&T Southeast region comes with a self-install kit (KIT4BS) that contains 4 Suttle filters. 3 (900LC4-50BS) Suttle phone filters, 1 (900LCS4-50BS) Suttle phone filter with an ADSL convenience jack, and no wall filter. There is a sheet of paper in the kit telling you to go here www.bellsouth.net/filters if you need to order a wall filter.
The 2Wire Wireless Gateways, that I have seen, have always came with the 2Wire filter kit. I have helped people with about 5 2Wire installs here in the last couple of months.
The Motorola 2210-02-1006 Wired Gateways have came with the Suttle filter kit or the 2Wire filter kit. I have helped people with about 7 Motorola 2210-02-1006 installs here in the last couple of months.
.
.
There is a blue insert in the FastAccess DSL Welcome Guide that say this.
.
.
"The new at&t. Your world. Delivered.
If you have a wall-mount phone currently installed in your home, AT&T will provide you with one (1) complimentary wall-mount filter.
You will receive a complimentary Excelsus Wall Mount Filter (model Z-330W) by going to »store.att.com/wallmount. Visit our website and fill out customer information, entering the Promotional Code below in the appropriate field on the page, then click Submit.
This offer also includes free Shipping and Handling.
Promotional Code: wallmountfilter
WALLMNTINS1107"
.
.
Hope this can be of some help. |
|
marti
Color outside the lines
Premium,MVM
join:2001-12-14
Houston, TX
clubs: | reply to David
Yes, the wall mount filter seems like the best option. I looked in a few more places, and it seems to be lost. Yes I would like one!
--
Team Discovery |
|
malliego
join:2008-07-01
Reynoldsburg, OH | reply to Airwolf7
txs airwolf. i tried to order a filter but at&t said promotion code was invalid  |
|
Airwolf7
Premium
join:2004-12-12
Franklin, KY
·AT&T Southeast
| It is entirely possible that the promotion code in my previous reply is only for the AT&T Southeast region (formally BellSouth) and will not work in the other AT&T regions.
In the AT&T Southeast region if someone orders brand new FastAccess DSL service from AT&T Southeast then their self-install filter kit would not have came with a Wall Mount Filter, but it should have came with an insert providing instructions to order one FREE from AT&T. They quit sending Wall Mount Filters with the kits awhile back because they are very rarely used and it was a waste of money to send them out if most people don't need one. If someone has recently ordered FastAccess DSL service from AT&T Southeast and did not receive an insert providing instructions to obtain a Wall Mount Filter then they can call AT&T up and AT&T ought send them one free of charge.
I'm not exactly sure how things happen in the other AT&T regions.
If you have had DSL service for a long time and have just lost your Wall Mount Filter then you need to order one.
You can order one from the AT&T Store for $6.00 with $4.50 Shipping and Handling.
You can also order one from the manufacturer, but not really for less money. They do have a greater variety with more configuration options though.
--
.
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!"
"Those who beat swords into plowshares usually end up plowing for those who don't."
Quotes by Benjamin Franklin. |
|
Rob
In Deo speramus, God Bless the USA
Premium
join:2001-08-25
Kendall, FL
 ·Comcast
| reply to graysonf
What the.... |
|
graysonf
Premium,MVM
join:1999-07-16
Fort Lauderdale, FL
| Those guys are experts. Their specialty is network component selection, component placement, and wiring. No job too big or too small. Their portfolio is quite extensive which explains the slow to load web site.
I still laugh when I look at the site. I wish that they had some new material there though.
I know these guys can help with the OP's problem. |
|
