TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada | reply to lorio
Re: SpeedTouch 516 Tweaking :)
I have not gotten my hands on a change log. When/If I do i will post it. Bicephale is usualy on top of things with that regards. |
|
Bicephale
join:2005-09-24
 ·TekSavvy Solutions..
| 
ST546v6 with FW v7.4.3.2.0 ('ZZQ0AA7.432'), 2008-Jun-18 (1st part) | 
ST546v6 with FW v7.4.3.2.0 ('ZZQ0AA7.432'), 2008-Jun-18 (2nd part) |
No 'ChangLog' file here neither but here's what i've found...
I powered up my computer a few minutes ago, then i tried
to launch 'DMT v7.35' and the unit's logs show it just went
through a "KERNEL Warm restart"... That's not a 1st time,
i often noticed that behaviour (captured below), recently:
Home > SpeedTouch > Event Logs
I yet have to read from other ST owners that they observed
this phenomenon as well but it looks like Thomson released
one more 'DMT' hostile FirmWare, if one should ask me!... |
|
Bicephale
join:2005-09-24
·TekSavvy Solutions..
1 edit | Ha, and i keep selecting the summer time option but it
sorts of resets itself - which explains the 1 h delay...
Home > SpeedTouch > Configuration - System Configuration
Time Configuration
Time Source: Automatic
Date: 18-06-2008
Time: 14:00:48
Timezone: (UTC-05:00) Bogota, Lima, Quito
Summer Time: No
Time Since Power-on: 0 days, 0:30:50
Time Server 1: time.chu.nrc.ca
Time Server 2: time.nrc.ca |
|
mau108
Mau
Premium
join:2001-10-07
Thornhill, ON
clubs:
| reply to Bicephale
I haven't had the reboot problem yet, I have my modem connected to the router so this morning I just unplugged the modem to router wire and hooked up my pc connection directly to the modem and set a static ip and run dmt and works fine and dandy.
Will test it out tonight. |
|
Bicephale
join:2005-09-24 | My ST is configured as a self-contained MoDem/Router and the
behaviour i described started to appear quite a bit reproducible.
The very same 'DMT' triggered event happened minutes ago!... |
|
dslgr
join:2008-05-07
2 edits | reply to Bicephale
@Bicephale, try unchecking the "get CPUMem Stats" and see if the router does a warm restart again when using DMT.
As for the summer time, you can try setting dst to relative mode through telnet.
Here, you can find the cli for the 7.4.x firmwares and the release notes for the 536v6 (you can find other models too if you surf around).
Unfortunately, to get the notes you have to be a partner and have a login username and password. The cli is unlocked though. |
|
Bicephale
join:2005-09-24
·TekSavvy Solutions..
| Hi,
I used the GUI this morning to save one version of 'user.ini'
where the option is disabled and another with the option on.
A comparison of both files allowed me to finger point at this:
The problem vanished after a Power reset... I have no clue
what was happening before but it seems to be working now.
Oh, and my copy of the CLI Manual is dated 2008-Feb-27...
A binary comparison shows it's identical to the one which
you suggested. Unfortunately, when we compare the size of
the past versions we can only conclude it started shrinking:
2007-Feb-16
8488428 Bytes
2007-Feb-20
7070481 Bytes
2007-Oct-2
5438132 Bytes
Thanks for posting anyway! |
|
