Edrick
Premium
join:2004-09-11
Orlando, FL
1 edit | reply to Edrick
Re: Cooper Aspire Smart Dimmer
Nevermind |
|
Edrick
Premium
join:2004-09-11
Orlando, FL | reply to Edrick
Figured it out just tried and and hoped it work and it did.
--
Ricky Smith
|
|
Edrick
Premium
join:2004-09-11
Orlando, FL | reply to Edrick
I've got the toll free but they closed hours ago. Was wondering if anyone had installed these before or knew where I could get a PDF installation manual.
--
Ricky Smith
|
|
Greg_Z
Premium
join:2001-08-08
Springfield, IL
 ·Comcast
1 edit | reply to Edrick
said by Edrick  :As mentioned its not the RF Series the wiring is different for those. And, I take it that you did not click on the Customersupport/OnlineTools link for the 800#. |
|
Edrick
Premium
join:2004-09-11
Orlando, FL | reply to Edrick
As mentioned its not the RF Series the wiring is different for those.
--
Ricky Smith
|
|
Greg_Z
Premium
join:2001-08-08
Springfield, IL
·Comcast
1 edit | reply to Edrick
»www.cooperwiringdevices.com/aspi···ets.html
»www.cooperwiringdevices.com/cust···ols.html |
|
Edrick
Premium
join:2004-09-11
Orlando, FL | reply to Edrick
I tried all those links also its not the RF Series its the standard one.
PN: 9534SG
--
Ricky Smith
|
|
tschmidt
Premium,MVM
join:2000-11-12
Milford, NH
 ·Hollis Hosting
 ·Verizon Online DSL
·Fairpoint Communic..
2 edits | reply to Edrick
»www.cooperwiringdevices.com/aspi···heet.pdf
»www.cooperwiringdevices.com/aspirerf/
»www.cooperwiringdevices.com/aspi···ets.html
/tom |
|
Edrick
Premium
join:2004-09-11
Orlando, FL
| Alright so I'm trying to re-install these Cooper Aspire Smart Dimmers we have however I've lost the installation instructions. I've tried googling and going to their site but have been unable to find the instructions. Has anyone installed these before or know of a way I can get the instructions?
It's a Master Unit wired with no remote unit. So I know that you tie the red and blue wires together. So now Red/Blue Black and green are your options.
So green is ground naturally one of the black leads connects to the black and the red and blue would connect to the other lead but what I'm not sure about is does it matter which way its fed.
So will it matter if I connect the hot conductor from the power source to black or blue/red? Does it have to be connected to a specific one? I'm not sure being that it's one of these "smart dimmers"
--
Ricky Smith
|
|
