DS
IT Consultant
Premium
join:2007-01-19
Thunder Bay, ON
4 edits | reply to AmirDaTSME
Re: How to defeat the throttle
Has nothing to do with Bell or any ISP for that matter, you just simply can't expect too obtain to much over 10mbps from any given server even if you had a fiber line to your home with a gigabyte connection you would still have the same problem.
Majority of servers only have 10-100mbit ethernet connections and not all of them have gigabit fiber connections allowing faster downloads via HTTP/FTP.
No matter who you are with; Bell, Rogers, fiber from Level3 or etc, you will still have the same problem.
You just can't pull to much over 10mbps from only one server per download, this is why NewsGroups and P2P downloads with quality seeds can obtain max download of your connection with ups and downs.
(The max I am ever able to download on remote servers on a 100mbit link are a max of 3.5 MB/sec but that is pretty rare at most.)
Number one cause for slow downloads is server load and network congestion on the server's end and yours. |
|
Deadpool
Go Sens Go
Premium,VIP
join:2001-03-29
Canada
 ·Bell Sympatico
| reply to DS
I believe your mistaken.
First, BT doesn't target who's completed the torrent download first. It targets which pieces of the torrent are least available first. Ever download a torrent and within a few minutes you've started uploading? It's certainly not because you completed the download 100%/
You also can't download from a non-encrypted source unless you turn off encryption on your side (or if you have it on, it's not forced and you allow legacy connections).
You also can't download from an encrypted source unless you turn on encryption (for those who have set it to forced and do not allow legacy connections).
--
Disclaimer: If I express an opinion, it is my own opinion, not that of Bell or its related companies. |
|
DS
IT Consultant
Premium
join:2007-01-19
Thunder Bay, ON
2 edits | You are right about not being able to download from a non-encrypted source while encryption is turned on (small over sight)...
I haven't been mistaken at all about the downloading via BT, there are more then just clients with complete sources and non-complete, everything is downloaded in pieces but you mistakenly misread what I stated.
You are most likely to download better from clients who have complete sources and not 200 incomplete sources and just one seed.
I never knew Bell Employee's actually visited the forums on the weekend, I sure know that once the end of business hours reaches on Friday not even TekSavvy folks are seen or heard from until Monday. |
|
Deadpool
Go Sens Go
Premium,VIP
join:2001-03-29
Canada
·Bell Sympatico
| said by DS  :You are most likely to download better from clients who have complete sources and not 200 incomplete sources and just one seed. Agreed!
said by DS :I never knew Bell Employee's actually visited the forums on the weekend, I sure know that once the end of business hours reaches on Friday not even TekSavvy folks are seen or heard from until Monday. What can I say...I like you guys! 
--
Disclaimer: If I express an opinion, it is my own opinion, not that of Bell or its related companies. |
|
AmirDaTSME
join:2008-06-16 | reply to Anonymous Coward
why is it deadpool or any one for that matter i never seen these speed and i am on 16.mb profile 1735 KB/Sec Down is correct amount, but i am able to get max 1500 KB/sec that is ??? |
|
Dukie
join:2007-12-27
Shelburne, ON
| reply to Anonymous Coward
Ive given this a try and i thin i can get it semi work lol
I have Uttorrent 1.8 beta, ive got it setup to use 1723.
Enable unp port mapping turned off
enable nat-pmp port mapping turned off.
In my router with is a Speedstream 6520.
Ive tried to work out how Portfoward 1723.
But im so far unable to do it.
At least not so that utorrent in anyway pics up the ports fowarded.
Im getting SOME speed increase up to 150k , but im unable to get totally around the throttling issue.
Anyone give me any assistance working out how to foward 1723 on my Router? |
|
Deadpool
Go Sens Go
Premium,VIP
join:2001-03-29
Canada
·Bell Sympatico
| reply to AmirDaTSME
said by AmirDaTSME :why is it deadpool or any one for that matter i never seen these speed and i am on 16.mb profile 1735 KB/Sec Down is correct amount, but i am able to get max 1500 KB/sec that is ??? Is your upload set full throttle as well? That can somewhat reduce your speeds as well.
Aside from that, I'd have to see your line stats. Maybe you're not synching at 16 Mbps?
--
Disclaimer: If I express an opinion, it is my own opinion, not that of Bell or its related companies. |
|
AmirDaTSME
join:2008-06-16
1 edit |  said by Deadpool :said by AmirDaTSME :why is it deadpool or any one for that matter i never seen these speed and i am on 16.mb profile 1735 KB/Sec Down is correct amount, but i am able to get max 1500 KB/sec that is ??? Is your upload set full throttle as well? That can somewhat reduce your speeds as well. Aside from that, I'd have to see your line stats. Maybe you're not synching at 16 Mbps? THANKS FOR THE SEND BACK DEAD POOL I JUST WANT NO WHY I RECEIVE MAX 1500/KB'S HTTP OR ON TORRENT for that matter not syncing at 16 Mbps? I CHECK IT SAY 16320 S0O HAVE NO IDEA WHY I NEVER REACHED higher THEN 1500/KB SEC |
|
Seren
@bell.ca | reply to Anonymous Coward
Not working for me.
How do you do that : put any DHT or tracking on UDP/500, UDP/50, UDP/51 ???? |
|
look here
@videotron.ca
| said by Seren :
Not working for me.
How do you do that : put any DHT or tracking on UDP/500, UDP/50, UDP/51 ????
There are step by step instructions found here:
»www.p2pnet.net/story/16329
and here
»pervices.com/docs/throttling_tech_brief.pdf
for KTorrent & uTorrent. |
|
umm also
@videotron.ca | reply to Seren
Don't forget to use forced encryption. |
|
DS
IT Consultant
Premium
join:2007-01-19
Thunder Bay, ON
| reply to AmirDaTSME
said by AmirDaTSME :said by Deadpool :said by AmirDaTSME :why is it deadpool or any one for that matter i never seen these speed and i am on 16.mb profile 1735 KB/Sec Down is correct amount, but i am able to get max 1500 KB/sec that is ??? Is your upload set full throttle as well? That can somewhat reduce your speeds as well. Aside from that, I'd have to see your line stats. Maybe you're not synching at 16 Mbps? THANKS FOR THE SEND BACK DEAD POOL I JUST WANT NO WHY I RECEIVE MAX 1500/KB'S HTTP OR ON TORRENT for that matter not syncing at 16 Mbps? I CHECK IT SAY 16320 S0O HAVE NO IDEA WHY I NEVER REACHED higher THEN 1500/KB SEC Goto > »www.speedguide.net/downloads.php and download the "TCP Optimizer" link at near the top of the page.
After you download it, run it and do the following.
Click "Optimal Settings" at the bottom right of the window and then make sure the box for "Modify all network adapters" is checked under "Network Adapters Section" and then move the sliding bar under "Connection Speed" and set it to 16000 Kbps (one line over from 15000 Kbps). Reboot pc and redo steps for each Windows based pc connected to your DSL Modem. |
|
AmirDaTSME
join:2008-06-16
1 edit | reply to Anonymous Coward
hey ds yes i done this while back i put it to 20000kb but ill change it 16000 but don't think will have any affect anyways dead pool if possible u think u can make my speed go faster  get back me thanks i have 2wire, i check stats of 2wire its capped at 16320 also note tcp optimizer i put MTU:1492 PPPoE correct?? |
|
OOOOOOOOOOo
@bell.ca | reply to Anonymous Coward
Amir, start your own thread, your issue has nothing to do with this topic.
This hack has just stopped working for me, i'm certain my settings are correct. Uh oh, has Bell gotten wise? |
|
Bell_Abused
join:2006-10-07
·Bell Sympatico
| There will be holes and they will plug these holes eventually, like Rogers did.
With this DPI hardware which cost a fortune, I'm sure there is some guarantee by the manufacturer to sort out the holes as they arise.
Enjoy while you can and don't expect it to last forever. |
|
Bell_Abused
join:2006-10-07
·Bell Sympatico
1 edit | reply to DS
said by DS :I sure know that once the end of business hours reaches on Friday not even TekSavvy folks are seen or heard from until Monday. How about these employee posts on the weekend?
»/forum/teksavdirect |
|
DS
IT Consultant
Premium
join:2007-01-19
Thunder Bay, ON
1 edit | I was mostly referring to TSI Rocky, |
|
sure sure
@teksavvy.com
1 edit
 from:
Bell_Abused
| reply to DS
said by DS :I sure know that once the end of business hours reaches on Friday not even TekSavvy folks are seen or heard from until Monday. Sounds plural to me. As in more than just TSI Rocky..
P.S. A quick search on just Rocky, and you'll notice that man doesn't sleep, posts all hours of the night some days.
So, judging by YOUR posts, i'd say you're an ignorant fool that doesn't do his homework before running off at the mouth.. |
|
DS
IT Consultant
Premium
join:2007-01-19
Thunder Bay, ON
4 edits | {moderated} no I didn't do research regarding TSI hours but there amount of posts do drop by over 50% in public areas of the forums and not TSI Direct Forums during weekends. |
|
chewie12345
@bell.ca | reply to look here
pervices.com/docs/throttling_tech_brief.pdf
Website not working for me |
|
