http://www.dslreports.com/forum/r20769079 en Wed, 11 Nov 2009 07:41:02 EDT Wed, 11 Nov 2009 07:41:02 EDT http://www.dslreports.com/forum/remark,20772468 black_cobra : Thank you !]]> http://www.dslreports.com/forum/remark,20772468 Thu, 10 Jul 2008 21:28:18 EDT http://www.dslreports.com/forum/remark,20770243 emoci : It will work as long as:

-Your current connection is PPPOE based...quick way to figure this out is: Do you currently use a Login and Password in Your Router or directly login via XP/Vista using something resembling a dialup-like connection

Eg. If your current connection is something like what TSI offers here »www.teksavvy.com/en/busdsl.asp?ID=7&mID=1 it will work...

If your current connection is like this »www.teksavvy.com/en/busadsl.asp?ID=7&mID=1 it won't work

-Bell doesn't support MLPPP, so you'll need a login from TSI (remember a $10 Login includes 100GB usage)

-Finally if your two modems are working fine now, they should be fine for MLPPP but you'll need a WRT54GL router with the modded Tomato firmware to which the two modems will connect....]]> http://www.dslreports.com/forum/remark,20770243 Thu, 10 Jul 2008 14:03:57 EDT http://www.dslreports.com/forum/remark,20769268 black_cobra : I have 2 dsl modems , 1 x SS6520 and 1 x SS4200...

So it would work ?]]> http://www.dslreports.com/forum/remark,20769268 Thu, 10 Jul 2008 10:48:04 EDT http://www.dslreports.com/forum/remark,20769260 Vinch : It will work fine using the login from Teksavvy as long as it is the PPPoE service from Bell, not the Nexxia service where they give you a Cisco router.]]> http://www.dslreports.com/forum/remark,20769260 Thu, 10 Jul 2008 10:46:07 EDT http://www.dslreports.com/forum/remark,20769123 Gokuu : Bell doesn't support MLPPP.]]> http://www.dslreports.com/forum/remark,20769123 Thu, 10 Jul 2008 10:19:22 EDT http://www.dslreports.com/forum/remark,20769079 black_cobra : Hi,

This may sound dumb, but does mlppp work on Business DSL account from Bell too ?

We have 2 x 8mbps (cost ±200 + taxes) doing load balancing. SSL site like banks work 25% of the time. I am tired of this. I did like to try mlppp so I would have a real 16 mbps (or 12 mbps) down connection. Normally 1 line is up to 8 and the other is up to 6, but tech support put both at 8 :). So to lower cost, I would change the dsl package on the 8mbps line to have 2 x 6 mbps and run mlppp giving me 12 down 1,6 up (10200/1360 real speed). I know it is still beta but people have had good up time with what I have read so far in this forum...

So does mlppp work on Business DSL account from Bell too ?
Meaning I would still pay Bell 2x70$ for Business High Speed (6mbps) and 1 dsl login (10$) from TekSavvy ?

And if all is good, then I could see about switching to TekSavvy for both dsl line...

Btw, if we switch, since it is 2 business line would Bell remove us from the remote/co to put us somewhere else ? Right now the stats are 13 SNR and 20 Attenuation. And it would cost 130$ + taxes...

Thank you very much.

Marc.]]> http://www.dslreports.com/forum/remark,20769079 Thu, 10 Jul 2008 10:10:42 EDT