Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Baby Bells Join Forces To Keep Movers In The Ma Bell Family » Late to the game like always.
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Post a:
Post a:
« Cable anti-trust complaint and lobbying Congress next  
AuthorAll Replies


Jim Gurd
Premium
join:2000-07-08
Plymouth, MI
·Comcast

reply to Madness
Re: Late to the game like always.

said by Madness See Profile :

A little tip: Assuming you used a Bell 500 set, take the cover off (two screws on the bottom) & turn the phone so the ringer faces forward. Look closely between the gongs & you should see a sideways-G-shaped hole w/ a springy bar sticking out of it -- this is the "biasing spring." If presently set to the bottom of the "G", reverse it (see here: »www.porticus.org/bell/images/bel···_pos.jpg ).
Thank you, thank you!! I moved it over like it showed in the picture and now it rings properly when connected to my VoIP service.

Here is a picture I took of it with my cell phone camera a while ago.

It's too bad that VoIP doesn't work with pulse dialing. That phone worked really well with rotary dialing back when I had a POTS line.
--
Calling an illegal alien an undocumented worker is like calling a crack dealer an unlicensed pharmacist.


Madness
A flea circus at a dog show.

join:2000-01-05
Quincy, MA
·Verizon Online DSL

OK, that's is a Bell 554 wall phone. Same guts as the 500, though. One would need a pulse-to-tone converter to dial out on VoIP (using the dial!). They're not cheap though!

Of course, one could also use one of those old-school portable tone dialers that are held up to the mouthpiece, But, of course, that takes away the thrill of using the rotary dial.


Jim Gurd
Premium
join:2000-07-08
Plymouth, MI
·Comcast

Those things are the exact opposite of the old fashioned touchtone converters that were used when connecting a touchtone phone to a step-by-step switch. A lot of independent phone companies had that kind of setup back in the day.

I can remember being able to use my calling card without operator assistance using one of those payphones. I had to dial an 800 number to connect to my long distance carrier (Sprint). The payphones were post pay and the phone company made any calls starting with 1 go immediately to a reorder. In order access my carrier I had to dial 0+800 instead of 1+800. Once I connected I could touchtone out the number I was calling and the calling card number with no problem. Ahh, the memories.

Now the old steps are gone and replaced with digital switches even in the most remote areas.
--
Calling an illegal alien an undocumented worker is like calling a crack dealer an unlicensed pharmacist.
-
Forums » Baby Bells Join Forces To Keep Movers In The Ma Bell Family« Cable anti-trust complaint and lobbying Congress next  


Tuesday, 10-Nov 15:09:21 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [101] Moto Sold About 100,000 Droids
· [91] Verizon Keeps Swinging At AT&T
· [86] VoIP Over 3G Still Not Working For iPhone
· [50] Government Will Release Some Telco Wiretap Lobbying Documents
· [34] Bill Would Force ISPs To Block Financial Scams
· [24] Mediacom Hints At 50, 100 Mbps Speeds
· [19] Verizon's Hanging Up On Rural America
· [18] Clearwire To Get Another $1.5 Billion
· [16] Sprint Announces Job Cuts
· [14] Google Offers Free Holiday Airport Wi-Fi
Most people now reading
· Google Has Acquired Gizmo5 [VOIP Tech Chat]
· Windows 7 boot manager editing questions [Microsoft Help]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· House inspector failed to find major gas leak [Home Repair & Improvement]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Replace entry door [Home Repair & Improvement]
· How in the world am I going to get into college? [General Questions]
· Maximizing Rogue DPS for 3.1 [World of Warcraft]
· for all the bell haters out there. [TekSavvy]
· [ PVP] 3.2 DK PvP D/W Spec... [World of Warcraft]