voffkin
join:2008-07-19
| ZyWALL 2WG and Huawei E630 3G card setup
Dear All,
Could someone help me with 2WG setup please?
Well, my problem is might be the same as was described in this topic: »Zyxel Zywall 2wg Setup with Verizon Aircard 595
So, I have Huawei E630 card installed on my 2WG router. The router detects my card. I’m using the following settings for 3G setup:
Network type: WCDMA first, GSM later
APN: internet (provided by my ISP)
Authentication type: none
Username: blank
Password: blank
PIN code: from the SIM card
Phone number: *99#
Nailed-Up: checked
After the settings entered I can see the status of the card on HOME page of the router and “ready to Connect” status of the card. So’ I’m trying to dial. After a couple of seconds browser refreshes and “dialing” string appears instead of “DIAL” button. Than, after another second, browser refreshes again and status changing to “Ready to Connect”.
Any ideas on this issue are highly appreciated.
P.S. I’ve checked the log and noticed the following line:
Board 0 line 0 channel 1, call 55, C01 Outgoing Call dev=3 ch=1 *9
Brgds,
VFFK |
