kg
Premium
join:1999-11-06
Monrovia, CA
clubs: 
| [Wireless] "No Internet connection"..Need Help
Here is my dilemma...I have an old Linksys BEFW11S4 currently hooked up and working fine with dhcp enabled., i am trying to upgrade to a WRT54GSV4, it is setup and configured the same way as the B router but when i connect it it will not get an internet connection in dhcp mode, it will get a connection if i switch it to a static ip config. but no go with the dhcp, i have current firmware in both units, just a bunch of 0.0.0.0 at the status page, any ideas to fix this would be appreciated.
KG |
|
DrPepper
@rr.com | Reset or power cycle your DSL/cable modem with the new router attached. If the router doesn't get an IP after the modem is back on, power cycle the router as well. |
|
kg
Premium
join:1999-11-06
Monrovia, CA
clubs: | I have tried power cycling both but to no avail, it's weird,the old "B" router works fine and the new "G" one won't work at all, i have gone back and forth so many times i'm getting dizzy. |
|
DrPepper
@rr.com | reply to kg
Another option would be to clone the WAN MAC address of the old router onto the WAN of the new router. |
|
kg
Premium
join:1999-11-06
Monrovia, CA
clubs: | I even tried that without any luck  |
|
