nakedland
join:2002-05-18
Friday Harbor, WA | reply to Bytebender
Re: [ Troubleshooting] VersaLink Wireless Gateway login
That worked perfectly. Thank you so much. |
|
Bytebender
Bytebender
Premium
join:2008-02-12
Canada
| reply to nakedland
also try your verizon username and password
the unit is reset by pressing and holding the reset button, (found on the back of the unit hidden in a hole with a red circle around it), for ten-15 seconds with the unit powered on.
After resetting, the user/pass will be admin/password
IF the activation screen appears you will have to either go through the account activation again, or disable the redirecting page - 192.168.1.1/verizon/redirect.htm - click disable.
--
reboot, reset, reconfigure, then recycle. |
|
nakedland
join:2002-05-18
Friday Harbor, WA
 ·Comcast
 ·Verizon Online DSL
·Comcast Formerly ..
| reply to Bytebender
Thanks. Tried both and neither worked.
When you say reset the modem, you mean cycle it (turn off, disconnect and wait a minute or two and then turn back on?)
--
The difficult we do immediately; the impossible takes a little longer. |
|
Bytebender
Bytebender
Premium
join:2008-02-12
Canada | reply to nakedland
Before resetting try admin/admin. |
|
Danbeme32
@verizon.net | reply to nakedland
You can reset the modem and the default password will be.
user : admin
password: password.
After that you can set your know password but all the settings you had will be set back to default |
|
sashwa
Pixie Cat Crunchin' n Foldin'
Premium,Mod
join:2001-01-29
Alcatraz
clubs:  | reply to nakedland
Moved in from Verizon Wireless. |
|
nakedland
join:2002-05-18
Friday Harbor, WA
·Comcast
·Verizon Online DSL
·Comcast Formerly ..
|  [ Troubleshooting] VersaLink Wireless Gateway login
I have the Westell Model 327W wireless router I got from Verizon. Going to the Versalink Wireless gateway page, I have tabs for "main, wireless settings, my network, firewall settings, advanced and system monitoring".
When trying to access firewall settings and/or under the wireless settings basic security settings or advanced security settings....a box comes up and asks for username and password.
It's been a while since going to this page, about 6 months actually, and username and password that I would use is denied. Is there w way to see if I'm using the proper username and/or password or perhaps a way to reset them both? Thank u
--
The difficult we do immediately; the impossible takes a little longer. |
|
