http://www.dslreports.com/forum/r20929778 en Fri, 27 Nov 2009 04:45:45 EDT Fri, 27 Nov 2009 04:45:45 EDT http://www.dslreports.com/forum/remark,20933866 nakedland : That worked perfectly. Thank you so much.]]> http://www.dslreports.com/forum/remark,20933866 Mon, 11 Aug 2008 14:16:22 EDT http://www.dslreports.com/forum/remark,20933296 Bytebender : also try your verizon username and password

the unit is reset by pressing and holding the reset button, (found on the back of the unit hidden in a hole with a red circle around it), for ten-15 seconds with the unit powered on.

After resetting, the user/pass will be admin/password

IF the activation screen appears you will have to either go through the account activation again, or disable the redirecting page - 192.168.1.1/verizon/redirect.htm - click disable.
--
reboot, reset, reconfigure, then recycle.]]> http://www.dslreports.com/forum/remark,20933296 Mon, 11 Aug 2008 12:22:45 EDT http://www.dslreports.com/forum/remark,20932973 nakedland : Thanks. Tried both and neither worked.

When you say reset the modem, you mean cycle it (turn off, disconnect and wait a minute or two and then turn back on?)
--
The difficult we do immediately; the impossible takes a little longer.]]> http://www.dslreports.com/forum/remark,20932973 Mon, 11 Aug 2008 11:27:36 EDT http://www.dslreports.com/forum/remark,20931679 Bytebender : Before resetting try admin/admin.]]> http://www.dslreports.com/forum/remark,20931679 Mon, 11 Aug 2008 01:09:43 EDT http://www.dslreports.com/forum/remark,20931321 anon : You can reset the modem and the default password will be.

user : admin
password: password.

After that you can set your know password but all the settings you had will be set back to default]]> http://www.dslreports.com/forum/remark,20931321 Sun, 10 Aug 2008 23:13:40 EDT http://www.dslreports.com/forum/remark,20931271 sashwa : Moved in from Verizon Wireless.]]> http://www.dslreports.com/forum/remark,20931271 Sun, 10 Aug 2008 23:01:19 EDT http://www.dslreports.com/forum/remark,20929778 nakedland : I have the Westell Model 327W wireless router I got from Verizon. Going to the Versalink Wireless gateway page, I have tabs for "main, wireless settings, my network, firewall settings, advanced and system monitoring".
When trying to access firewall settings and/or under the wireless settings basic security settings or advanced security settings....a box comes up and asks for username and password.

It's been a while since going to this page, about 6 months actually, and username and password that I would use is denied. Is there w way to see if I'm using the proper username and/or password or perhaps a way to reset them both? Thank u
--
The difficult we do immediately; the impossible takes a little longer.]]> http://www.dslreports.com/forum/remark,20929778 Sun, 10 Aug 2008 17:25:15 EDT