US Telco Support → Verizon → Verizon DSL > Need to switch between Interleave and FastPath? Part 2

Re: Need to switch between Interleave and FastPath? Part 2

So I noticed my speed went to crap recently. Decided to check my Trans stats and noticed I got bounced off Fast Path. Also noticed my down speed is lower. Before I attempt to fight with their support, are my stats still good?

Transceiver Revision A2pB020b3.d20h
Vendor ID Code 4D54
Line Mode ADSL_G.dmt
Data Path INTERLEAVED

Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 2112 832
Margin (dB) 23.0 10.0
Line Attenuation (dB) 29.0 18.0
Transmit Power (dBm) 18.2 11.9

The stats seem to be the same as what I had back in 2009 when I requested this, and again last August when there was a router going nuts in PA. But they might have changed their requirements.

I also noticed this line from Verizon's trans stats.
Max. Attainable Bit Rate [kb/s]: 8128 832
Would that mean I could get faster than my previous 3360?

VPI: 0
VCI: 35
Broadband Mode Setting: ADSL
Broadband Negotiated Mode: G.DMT
Connection Status: CONNECTED
Downstream Speed: 1792 Kbps
Upstream Speed: 448 Kbps
Retrains: 0
Retrain Timer: 0 Days, 0H:47M:43S
ATM QoS class: UBR
Near End CRC Errors Interleave: 0
Near End CRC Errors Fastpath : N/A
Far End CRC Errors Interleave : 0
Far End CRC Errors Fastpath : N/A
30 Minute Near End CRC Interleave : 0
30 Minute Near End CRC Fastpath : N/A
30 Minute Far End CRC Interleave : 0
30 Minute Far End CRC Fastpath : N/A
Near End RS FEC Interleave : 0
Near End RS FEC Fastpath : N/A
Far End RS FEC Interleave : 0
Far End RS FEC Fastpath : N/A
30 Minute Near End FEC Interleave : 0
30 Minute Near End FEC Fastpath : N/A
30 Minute Far End FEC Interleave : 0
30 Minute Far End FEC Fastpath : N/A
30 Minute Discarded Packets Downstream : 0
30 Minute Discarded Packets Upstream : 0
SNR Downstream : 25 dB
SNR Upstream : 24 dB
Attenuation Downstream : 18 dB
Attenuation Upstream : 11 dB
Power Downstream 5 dBm
Power Upstream 11.9 dBm

Hello all! with my current stats am I able to get switched to fastpath over interleave?

shouldn't be a problem

Transceiver Statistics

I am a noob at this can I get fastpath

Transceiver Revision A2pB020b3.d20h
Vendor ID Code 4D54
Line Mode ADSL_G.dmt
Data Path INTERLEAVED

Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 2944 704
Margin (dB) 7.9 10.0
Line Attenuation (dB) 55.0 31.0
Transmit Power (dBm) 18.4 11.9

09/14/2013 02:27:01 AM kernel Line 0: ADSL link up, interleaved, us=864, ds=2528

I just saw this in my modem dsl report i assume it got switched back to interleave automatically?