dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
184289
share rss forum feed view:
normal
page: 1 · 2 · 3 · 4 ... 49 · 50 · 51 · next

cvasquez1234

join:2008-09-30
Arlington, VA
reply to Smith6612

[Interleave/Fastpath] Re: Need to switch between Interleave and FastPath? Part 2

Are my statistics good enough for FastPath?

Transceiver Revision: 7.2.3.0
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved

Transceiver Information Downstream Path Upstream Path
DSL Speed (Kbits/Sec) 3360 864
Margin (dB) 14.5 12.0
Line Attenuation (dB) 40.5 25.0
Transmit Power (dBm) 6.2 11.9

Thanks ahead of time...



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24

Yes, those stats should be fine.


zhardhead

join:2005-05-24
Clarksville, OH
reply to Smith6612

I was on fastpath for 2 months when i was having issues with my line they installed new equipment and I reupped my contract for another year and it switched back to this adsl2+ interleaved instead of the g.dmt interleaved . Can I get switched back to fastpath please, I was not having any issues on it when it was on . And the line response was much better

Transceiver Revision: 4.2.0.11
Vendor ID Code: 4
Line Mode: ADSL2+ Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 858 156
Margin (dB) 13.5 37.0
Line Attenuation (dB) 49.0 26.0
Transmit Power (dBm) 19.1 11.7



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24

I think something may be adding some noise to your line, as your margin on the downstream should be a lot higher, but you should be all set to go for FastPath.


berryman

join:2008-10-04
Wabash, IN
reply to Smith6612

Can I get FastPath?

Transceiver Revision: 4.2.0.11
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3360 864
Margin (dB) 18.5 11.0
Line Attenuation (dB) 18.5 12.0
Transmit Power (dBm) 7.3 11.9



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24

Your line is good for FastPasth, even with 7.1Mbps as well, so go ahead and request it. Enjoy!


berryman

join:2008-10-04
Wabash, IN

This might be a dumb question but I have to ask, What do you mean by "even with 7.1Mbps as well."



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24
Reviews:
·Verizon Online DSL
·Frontier Communi..

Basically in some areas, you can get a higher speed than the 3Mbps speed for residential rates. By saying that, if 7.1Mbps were available to you and if you ever wanted it, your margins and attenuation is low enough where you can boost your speed to almost triple the sync rate on the downstream, same sync upstream and still keep enough margin to hold the connection with FastPath reliably.


erikhmeier

join:2002-01-31
Alexandria, VA
reply to Smith6612

Just wondering if it is worth the shot to move to FastPath and/or 7.1 (if available). First hop pings are currently ~ 24ms.

Here are my stats:
Transceiver Revision: 6.2.0.211
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3360 864
Margin (dB) 14.0 12.0
Line Attenuation (dB) 40.5 26.0
Transmit Power (dBm) 7.2 11.9



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24

That line should be fine for FastPath. The margins are where expected based on your speed and distance.



starcaptor

join:2000-08-19
East Northport, NY
Reviews:
·Verizon FiOS
reply to Smith6612

Heres my stats. Sorry im using an ActionTec modem so Im gonna have to manually type these.

DSL Mode Setting: MMODE
DSL Negotiated Mode: G.DMT
Connection Status: Showtime
Speed (down/up): 3360/864
SNR Margin (Downstream/Upstream): 18/9
Attenuation (Downstream/Upstream): 23/33

The upload occasionally syncs at 832 instead. I assume that isnt good...11.8k from CO accd to acedsl.



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24
Reviews:
·Verizon Online DSL
·Frontier Communi..

1 edit

The upstream syncing improperly is because of the upstream margin. If anything it looks as though you're less than 11.8k from your exchange, it looks like something may just be adding noise to the upstream as the downstream has a good margin (18dB on the downstream at your speed is very good! Shows you're close to the exchange). Before you ask for FastPath, I'd try cleaning up your line a bit to see if you can get the upstream path margin a bit higher. If not, you can still request it but your upstream sync will lower slightly.


erikhmeier

join:2002-01-31
Alexandria, VA
reply to Smith6612

Thanks.

Got switched very quickly and my first hop pings have dropped from 25 ms to under 10 ms. Hope this helps as I'm on VPN all the time.



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24

You're welcome. Enjoy it!


Claybor

join:2008-10-14
Salem, VA
reply to Smith6612

Fastpath was recommended by a friend to possibly combat my gaming lag issues. I thought I would ask here before spending a bunch of time on the telephone. Thanks for any assistance that you can give.

Transceiver Statistics

Transceiver Revision: 7.2.3.0
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved

Transceiver Information Downstream Path Upstream Path
DSL Speed (Kbits/Sec) 1792 448
Margin (dB) 16.0 20.0
Line Attenuation (dB) 49.5 30.0
Transmit Power (dBm) 13.0 11.8



Jodokast96
Stupid people really piss me off.
Premium
join:2005-11-23
Erial, NJ
kudos:2

Stats are plenty strong enough for it. Don't waste time on the phone hoping you get someone that actually knows what it is. Go post the request in the Verizon Direct forum.


Claybor

join:2008-10-14
Salem, VA

Thanks. Done.


Claybor

join:2008-10-14
Salem, VA

1 edit
reply to Smith6612

I did not read through every post in the 1st forum, but from what I skimmed through most everyone seemed pleased with the results of switching.

How often does someone make the switch to fastpath and regret it?



Jodokast96
Stupid people really piss me off.
Premium
join:2005-11-23
Erial, NJ
kudos:2

Haven't seen one yet.


kingofthenet

join:2005-11-22
Keansburg, NJ
reply to Smith6612

Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3360 864
Margin (dB) 17.2 14.0
Line Attenuation (dB) 30.0 16.5
Transmit Power (dBm) 7.8 12.1

I am on interleave, can I handle this Fastpath?



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24

Margins are good, go ahead and request FastPath


Xylem

join:2008-10-11
Baldwin Park, CA
reply to Smith6612

Sorry, this might be a dumb question but I am new to this. How do I find out my line stats?



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24
Reviews:
·Verizon Online DSL
·Frontier Communi..

This is dependant on your modem that you're using. For most Westells, it's »192.168.1.1/transtat.htm or you go to System Monitors/Advanced Monitors/Transceiver stats and get the stats there. I think the ActionTecs are laid out the same way as going to System Monitors and such, but since I don't have any knowledge on them I don't know where to find them besides searching.


schwenkster

join:2008-10-21
Terre Haute, IN

1 edit
reply to Smith6612

I just joined the site and this topic caught my eye. Do you think I could move to FastPath?

Transceiver Revision: 4.3.0.1
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 7616 864
Margin (dB) 14.0 8.0
Line Attenuation (dB) 10.0 7.0
Transmit Power (dBm) 10.8 11.9

thanx

Also wondering where I would ask for this to be done since you say its easier and fast to ask on here. Thanks again



Jodokast96
Stupid people really piss me off.
Premium
join:2005-11-23
Erial, NJ
kudos:2

Oooohhhh!!! 7.1 and good stats to boot! By all means, go for Fastpath. The US Margin is low, but I don't think it will be an issue. The best place to request it is in the Verizon Direct forum on this site.



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24
reply to schwenkster

Nice sync you have there . As Jodo stated, FastPath is doable on that line so go ahead and ask for it in the V* direct forum.


superdave97

join:2007-11-11
Garland, TX
reply to Smith6612

Just moved into Verizon area, would I qualify for fastpath?

Transceiver Revision: 7.2.3.0
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved

Transceiver Information Downstream Path Upstream Path
DSL Speed (Kbits/Sec) 3360 768
Margin (dB) 16.0 9.0
Line Attenuation (dB) 32.0 22.0
Transmit Power (dBm) 7.4 11.9



Smith6612
Premium,MVM
join:2008-02-01
North Tonawanda, NY
kudos:24
Reviews:
·Verizon Online DSL
·Frontier Communi..

2 edits

You would quality for it, however your upstream sync is not synced properly, and the noise margin is too low on the upstream. I would get the line cleaned up a little so that the upstream syncs at 864kbps, and the margin is a bit higher than 9 as well if possible. Once you do this, you're all set to go.



Jodokast96
Stupid people really piss me off.
Premium
join:2005-11-23
Erial, NJ
kudos:2

Just try a reboot first.


coolboy0286

join:2007-11-29
Philadelphia, PA
reply to Smith6612


Transceiver Revision: 7.1.254
Vendor ID Code: 4
Line Mode: G.DMT-Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3360 832
Margin (db) 8.5 12.0
Line Attenuation (db) 53.0 18.5
Transmit Power (db/Hz) 15.0 11.0

Do I qualify for fastpath?

page: 1 · 2 · 3 · 4 ... 49 · 50 · 51 · next