kamakazie2
join:2009-01-10
Morganville, NJ
| reply to Smith6612
Re: Need to switch between Interleave and FastPath? Part 2
Can i make the switch to Fastpath? Also i want to try go get to 7.1 as i am literally down the street from the Verizon Base building....
Transceiver Revision: 7.2.3.0
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved
Transceiver Information Downstream Path Upstream Path
DSL Speed (Kbits/Sec) 3360 864
Margin (dB) 20.5 13.0
Line Attenuation (dB) 29.5 18.0
Transmit Power (dBm) 7.3 11.8 |
|
Jodokast96
R.I.P Bassman442
Premium
join:2005-11-23
Erial, NJ | Fine for Fastpath, and most likely for 7.1 if available (it's not everywhere). |
|
kamakazie2
join:2009-01-10
Morganville, NJ | Thanks! |
|
l337m4n
join:2004-11-07
1 edit | reply to Smith6612
I recently upgraded to the 7.1 but as you can see there was 0 difference from my 3.0 line, if anything it is worse. I don't know why there was no speed change but my quality did go down, usually the speed test won't go over 1800kb before it was at least 2100. It has been up and down and every time i restart the modem it seems to get slower. I see im on the fast path already but i have had no change in pings in the servers i play in. I really think the upgrade was not completed right or my house wring must be that bad, i don't know.
Transceiver Statistics
Transceiver Revision 3.3.2.2.0.1
Vendor ID Code 4D54
Line Mode ADSL_G.dmt
Data Path FAST
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 2080 832
Margin (dB) 6.0 6.0
Line Attenuation (dB) 56.6 31.5
Transmit Power (dBm) 17.0 11.9 |
|
Smith6612
Premium
join:2008-02-01
united state
 ·Dish Network
 ·Verizon Online DSL
·FrontierNet Intern..
| Do you have a post or a copy of your old transceiver stats before the bump up to 7.1Mbps? If your stats were much better, I wonder what may have happened as right now those stats say no go for even 3Mbps service.
--
It's all fun and games in a Team Fortress 2 battle until your sentry gun is sapped by the Spycrab! |
|
freddesite
join:2009-10-07
·Verizon Online DSL
| reply to Smith6612
Which should mine be?
Transceiver Statistics
Transceiver Revision A2pB020b3.d19d
Vendor ID Code 4D54
Line Mode ADSL_2plus
Data Path FAST
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3705 827
Margin (dB) 6.1 9.9
Line Attenuation (dB) 54.0 31.3
Transmit Power (dBm) 17.2 12.4 |
|
dajedipimp
join:2009-09-20
| reply to Smith6612
Do I qualify for fastpath??
Transceiver Statistics
Transceiver Revision A2pB020b3.d20h
Vendor ID Code 4D54
Line Mode ADSL_G.dmt
Data Path INTERLEAVED
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3360 768
Margin (dB) 10.6 11.0
Line Attenuation (dB) 55.0 31.5
Transmit Power (dBm) 19.3 11.9
Thanks  |
|
tdavis5432
join:2001-05-20
Emporia, VA
1 edit | reply to Smith6612
Transceiver Revision: 4.2.0.11
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 3360 864
Margin (dB) 15.5 10.0
Line Attenuation (dB) 34.5 21.0
Transmit Power (dBm) 6.9 11.9
Do I qualify for fastpath? I think i had it before, would really love it again, thanks! Also where do I officially request it? I'm sure I have to give someone who works @verizon my phone number etc right? |
|
Smith6612
Premium
join:2008-02-01
united state
·Dish Network
·Verizon Online DSL
·FrontierNet Intern..
| reply to freddesite
@freddesite: Your margins are too low for FastPath. I did reply to your other thread on your line being out of sync, so we'll see what we can do there first. At the moment though that line should be on Interleaved to get more margin out of it.
@dajedipimp: The line has a bit of attenuation on it as well as the upstream being out of sync. If you have a NID, plug your modem into that to see if the stats are any better. If not, we can see if we can get Verizon to move the line to ADSL2+
@tdavis5432: Your line is good to go for FastPath. Just visit the Verizon Direct forum located on this website to get it switched. Here's the link: »/forum/vzdirect
--
It's all fun and games in a Team Fortress 2 battle until your sentry gun is sapped by the Spycrab! |
|
dajedipimp
join:2009-09-20
| said by Smith6612  :@dajedipimp: The line has a bit of attenuation on it as well as the upstream being out of sync. If you have a NID, plug your modem into that to see if the stats are any better. If not, we can see if we can get Verizon to move the line to ADSL2+ Not that I've seen since I live in a newer apartment complex or don't have access to :/ |
|
Smith6612
Premium
join:2008-02-01
united state
·Dish Network
·Verizon Online DSL
·FrontierNet Intern..
| Oh, ok. If the apartments are fairly new and if everything is filtered correctly (and there's nothing such as alarms or communication systems on the line like some apartments have that are unfiltered) then it might just be a long line.
--
It's all fun and games in a Team Fortress 2 battle until your sentry gun is sapped by the Spycrab! |
|
dajedipimp
join:2009-09-20 | Yea could just be long line since I'm on the 3rd floor :/
Should I just go ahead and request for ADSL2+ or have verizon try to fix the attenuation and sync? |
|
Smith6612
Premium
join:2008-02-01
united state | You can try asking for ADSL2+ to see if Verizon is able to give it to you. |
|
netsurfer41
join:2006-10-02
Howard Beach, NY
1 edit | reply to Smith6612
From reading the posts, I don't think my loop's good for FastPath, but just checking. Is the loop even good for 3Mbps?
Stats are:
Transceiver Revision: 7.1.254
Vendor ID Code: 4
Line Mode: G.DMT-Mode
Data Path: Interleaved
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 1760 448
Margin (db) 7.0 12.0
Line Attenuation (db) 63.5 18.5
Transmit Power (db/Hz) 13.0 11.0
TIA |
|
Jodokast96
R.I.P Bassman442
Premium
join:2005-11-23
Erial, NJ | Your really not good enough for what you have, but if it works....... |
|
Smith6612
Premium
join:2008-02-01
united state
·Dish Network
·Verizon Online DSL
·FrontierNet Intern..
1 edit | reply to netsurfer41
Plug your modem into the NID and post up the stats from there. The attenuation is not in a 2:1 ratio (where it typically is on a good line) which might be indicating some bad wiring someplace. The upstream attenuation suggests that the line should be capable of 3Mbps + FastPath.
--
It's all fun and games in a Team Fortress 2 battle until your sentry gun is sapped by the Spycrab! |
|
Californio
join:2004-09-05
Ontario, CA
| reply to Smith6612
A couple of days ago I upgraded from 3.2Mbps to 7.1Mbps, but am not getting all of the speed. What might help to get my speed up to where it should be? Would getting the line mode changed to ADSL2+ help? Can I get FastPath also? Thanks.
Westell 7500
Transceiver Revision A2pB020b3.d20h
Vendor ID Code 4D54
Line Mode ADSL_G.dmt
Data Path INTERLEAVED
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 5632 864
Margin (dB) 6.6 15.0
Line Attenuation (dB) 28.0 12.0
Transmit Power (dBm) 19.7 12.1 |
|
Smith6612
Premium
join:2008-02-01
united state
·Dish Network
·Verizon Online DSL
·FrontierNet Intern..
| Your line should be short enough in itself to handle 7.1Mbps sync. Do you have a NID? The downstream isn't synced properly, but the upstream is. Plug the modem into your NID and post up the stats again. From there, we'll see what changes can be made.
--
It's all fun and games in a Team Fortress 2 battle until your sentry gun is sapped by the Spycrab! |
|
Californio
join:2004-09-05
Ontario, CA
| reply to Smith6612
Okay, I plugged in the modem to the NID and this is what I got:
Westell 7500
Transceiver Revision A2pB020b3.d20h
Vendor ID Code 4D54
Line Mode ADSL_G.dmt
Data Path INTERLEAVED
Transceiver Information Down Stream Path Up Stream Path
DSL Speed (Kbits/Sec) 6816 864
Margin (dB) 5.2 15.0
Line Attenuation (dB) 27.0 12.0
Transmit Power (dBm) 19.8 12.1
The downstream is improved when plugged into the NID, what would cause the slowdown in between the NID? There is at most 30 ft. of CAT5e between the NID and the room where the modem sits.
(I have some CAT6 cables I could run if it's degradation caused by the line I suppose.) |
|
Smith6612
Premium
join:2008-02-01
united state
·Dish Network
·Verizon Online DSL
·FrontierNet Intern..
| That could all be simply based on what is around the wiring that you're going through as well as the quality of the copper outside. You can try things out with the CAT6 cable to see how that works out even though CAT5 should be more than sufficient. Otherwise, you can try asking for ADSL2+ and then posting back to see how the line stats look then. Proper sync rate for the 7.1Mbps is 7616kbps downstream, 864kbps upstream.
--
It's all fun and games in a Team Fortress 2 battle until your sentry gun is sapped by the Spycrab! |
|
