jagraff
join:2006-12-02
Rindge, NH | reply to WizOz5
Re: [DW6000] hnFapmon no tx/rx information
That's what I sort of figured. Just wanted to make sure...thanks |
|
Raminto
join:2006-02-28
Whitehorse, YT
| reply to jagraff
said by jagraff  : If I rest bucket now, the bucket won't be accurate in hpfapmon will it? It will jump to 100% regardless of what you have already used. To be on the safe side, just leave it.
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro |
|
jagraff
join:2006-12-02
Rindge, NH
| reply to WizOz5
Edited the .pm file info...thanks for the instructions.
I did a stop/start from the control panel. Bucket is 21%, which seems low. Do I need to reset the bucket? Before editing the file I just downloaded +-20MB. If I rest bucket now, the bucket won't be accurate in hpfapmon will it?
--
74West/1250Mhz/Proplan/.76m dish/HNS7000S/LinksysWRT54G/WindowsXPsp2 |
|
yolarry
join:2007-12-29
Creston, WV | reply to WizOz5
I just got me the new Auguest 28th for my 7000S. thanks to this tutorial I got hnfapmon back to work  |
|
io chico
join:2003-12-30
Chico, CA
 ·DigitalPath
 ·HughesNet Satellit..
| reply to Raminto
Thanks for these instructions. I got my hnfapmon working again. It would have worked earlier, if I followed instructions better. I kept doing an Exit (closing and opening the program), instead of running hnFAPMon Control Panel, selecting Start/Stop the Service!
--
hn7000s home plan| signal 87 | SatMex5 | 117 West | Vista laptop 3GB ram | XP 1GB ram | Ubuntu Dapper 512MB ram | Firefox only | ZyXEL router |
|
Raminto
join:2006-02-28
Whitehorse, YT | reply to Pakapab
Your modem got an update and you will have to edit the pm file accordingly. |
|
Pakapab
Premium
join:2002-03-17
Cap Haitien | reply to WizOz5
I ve got a hn7000s and fap mon stopped working 4 days ago... the tx rx i mean. Whats up. |
|
DaveL
join:2005-11-12
Urbana, IL
1 edit | reply to WizOz5
Ok, got it fixed.
I have an HN7000s modem and I kept fussing with the hnS7000s file.
It is jumpy now though as to the actual bucket fill. I forgot how I fixed that the last time. |
|
DaveL
join:2005-11-12
Urbana, IL
1 edit | reply to WizOz5
Did the edit and save, stop and start. Even rebooted. no joy |
|
Raminto
join:2006-02-28
Whitehorse, YT | reply to DaveL
Just edit the pm files accordingly and save the changes.
Stop and restart fapmon. |
|
DaveL
join:2005-11-12
Urbana, IL
3 edits | reply to WizOz5
Where is this .pm file located?
Edit: Found it.
Not having a lot of luck here.
My vista machine had the right firmware number but the wrong command.
My xp machine had the right command but the wrong firmware number.
No luck getting either to rx/tx again.
Next idea please?
FWIW: Fmon was working fine with the new HN update...Until..I got a new vista update this morning. |
|
Joel_T
join:2007-12-15
Vernonia, OR
·HughesNet Satellit..
| reply to WizOz5
Thanks Raminto
My HnfapMon quit working a couple days ago, although my update says Aug 28, and we've had a terrible "connection" for a couple weeks. I cannot imagine how you guys know all this stuff but thanks. My monitor is working again.
--
Joel T - Vernonia Or
$60 Home Plan on HN7000S 99W 970MHz |
|
WizOz5
join:2004-02-28
Summerville, SC
| reply to WizOz5
Well i tried changing to command 22 that didnt work but it was worth the try. Is there a way I can update the software? From what I understood Hughes pushes updates to them. But I think they forgot this one. Of course it dont help being over here in Turkmenistan im over here for 4 months. And im trying to get this working so we can monitor how much we are using. Because they got 11 computers running off this connection and none of this people understand how SAT works. So they keep going over the limit. So if yu know of a way i can force an update please let me know. The thing is the backup update is newer then the one its running. Not much newer but it is. |
|
laserfan
join:2005-01-14
Blanco, TX
| reply to Raminto
said by Raminto :Your modem really runs with an old (antique) version. Yeah 4.3.1.5 -- how is this even possible? Mine is 5.4.1.11.
--
DW6000CEv5.4.1.11, G13/H1@127W, 1270MHz, SigTyp74, 10-20clients & 6+OSes |
|
Raminto
join:2006-02-28
Whitehorse, YT
| reply to WizOz5
Hope others will post with the same 6000 Version.
Your modem really runs with an old (antique) version. Maybe a re-registration will give you a newer version.
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro |
|
tobicat
join:2005-04-18
Tombstone, AZ | reply to WizOz5
Just for the heck of it try command=22 I seem to recall that that was the correct one at one time.
--
9000 spaceway III, 7000S SatMex 5 1270, Dlink wirless |
|
WizOz5
join:2004-02-28
Summerville, SC
| reply to WizOz5
Yeah I tried that last night and it didnt work. The top picture is what Fapmon shows without editing the modem defs. And the bottom picture is what happens when I change the version number in the modem defs. Im not sure whats going on there is little or no support from the maker. And I have tried most of the things I have read in forums. |
|
Raminto
join:2006-02-28
Whitehorse, YT
| reply to WizOz5
I do not know if it will work, but you can try to put your version in this line of the pm file like this:
'4.2.1.5' => '/statcgi/pepstats.bin.
It's worth a try
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro |
|
WizOz5
join:2004-02-28
Summerville, SC
| reply to WizOz5
screenshot |
|
|
Raminto
join:2006-02-28
Whitehorse, YT
| reply to WizOz5
Change this line:
'5.4.1.8' => '/cgi/execAdvCom.bin?Command=63',
replace 5.4.1.8 with your actual version and 63 with your command number.
Maybe this picture will help
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro |
|
