[DW6000] hnFapmon no tx/rx information in HughesNet Satellite http://www.dslreports.com/forum/r21026862 en Mon, 30 Nov 2009 16:28:19 EDT Mon, 30 Nov 2009 16:28:19 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21119680 jagraff : That's what I sort of figured. Just wanted to make sure...thanks]]> http://www.dslreports.com/forum/remark,21119680 Tue, 16 Sep 2008 14:39:11 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21119398 Raminto :
said by jagraff See Profile :

If I rest bucket now, the bucket won't be accurate in hpfapmon will it?
It will jump to 100% regardless of what you have already used. To be on the safe side, just leave it.
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro]]> http://www.dslreports.com/forum/remark,21119398 Tue, 16 Sep 2008 13:54:10 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21118108 jagraff : Edited the .pm file info...thanks for the instructions.
I did a stop/start from the control panel. Bucket is 21%, which seems low. Do I need to reset the bucket? Before editing the file I just downloaded +-20MB. If I rest bucket now, the bucket won't be accurate in hpfapmon will it?
--
74West/1250Mhz/Proplan/.76m dish/HNS7000S/LinksysWRT54G/WindowsXPsp2]]> http://www.dslreports.com/forum/remark,21118108 Tue, 16 Sep 2008 10:08:40 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21098394 yolarry : I just got me the new Auguest 28th for my 7000S. thanks to this tutorial I got hnfapmon back to work :D]]> http://www.dslreports.com/forum/remark,21098394 Fri, 12 Sep 2008 10:12:05 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21093177 io chico : Thanks for these instructions. I got my hnfapmon working again. It would have worked earlier, if I followed instructions better. I kept doing an Exit (closing and opening the program), instead of running hnFAPMon Control Panel, selecting Start/Stop the Service!
--
hn7000s home plan| signal 87 | SatMex5 | 117 West | Vista laptop 3GB ram | XP 1GB ram | Ubuntu Dapper 512MB ram | Firefox only | ZyXEL router]]> http://www.dslreports.com/forum/remark,21093177 Thu, 11 Sep 2008 10:57:48 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21091415 Raminto : Your modem got an update and you will have to edit the pm file accordingly.]]> http://www.dslreports.com/forum/remark,21091415 Wed, 10 Sep 2008 23:18:01 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21091276 Pakapab : I ve got a hn7000s and fap mon stopped working 4 days ago... the tx rx i mean. Whats up. ]]> http://www.dslreports.com/forum/remark,21091276 Wed, 10 Sep 2008 22:44:05 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21087323 DaveL : Ok, got it fixed.
I have an HN7000s modem and I kept fussing with the hnS7000s file.

It is jumpy now though as to the actual bucket fill. I forgot how I fixed that the last time. ]]> http://www.dslreports.com/forum/remark,21087323 Wed, 10 Sep 2008 10:57:46 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21087245 DaveL : Did the edit and save, stop and start. Even rebooted. no joy]]> http://www.dslreports.com/forum/remark,21087245 Wed, 10 Sep 2008 10:42:27 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21087233 Raminto : Just edit the pm files accordingly and save the changes.
Stop and restart fapmon.]]> http://www.dslreports.com/forum/remark,21087233 Wed, 10 Sep 2008 10:41:11 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21087093 DaveL : Where is this .pm file located?

Edit: Found it.
Not having a lot of luck here.
My vista machine had the right firmware number but the wrong command.
My xp machine had the right command but the wrong firmware number.
No luck getting either to rx/tx again.
Next idea please?

FWIW: Fmon was working fine with the new HN update...Until..I got a new vista update this morning. ]]> http://www.dslreports.com/forum/remark,21087093 Wed, 10 Sep 2008 10:12:23 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21081897 Joel_T : Thanks Raminto

My HnfapMon quit working a couple days ago, although my update says Aug 28, and we've had a terrible "connection" for a couple weeks. I cannot imagine how you guys know all this stuff but thanks. My monitor is working again.
--
Joel T - Vernonia Or
$60 Home Plan on HN7000S 99W 970MHz]]> http://www.dslreports.com/forum/remark,21081897 Tue, 09 Sep 2008 12:20:41 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21032195 WizOz5 : Well i tried changing to command 22 that didnt work but it was worth the try. Is there a way I can update the software? From what I understood Hughes pushes updates to them. But I think they forgot this one. Of course it dont help being over here in Turkmenistan im over here for 4 months. And im trying to get this working so we can monitor how much we are using. Because they got 11 computers running off this connection and none of this people understand how SAT works. So they keep going over the limit. So if yu know of a way i can force an update please let me know. The thing is the backup update is newer then the one its running. Not much newer but it is. ]]> http://www.dslreports.com/forum/remark,21032195 Sat, 30 Aug 2008 14:55:07 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21032120 laserfan :
said by Raminto See Profile :

Your modem really runs with an old (antique) version.
Yeah 4.3.1.5 -- how is this even possible? Mine is 5.4.1.11.
--
DW6000CEv5.4.1.11, G13/H1@127W, 1270MHz, SigTyp74, 10-20clients & 6+OSes]]> http://www.dslreports.com/forum/remark,21032120 Sat, 30 Aug 2008 14:40:04 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21031925 Raminto : Hope others will post with the same 6000 Version.
Your modem really runs with an old (antique) version. Maybe a re-registration will give you a newer version.
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro]]> http://www.dslreports.com/forum/remark,21031925 Sat, 30 Aug 2008 13:53:19 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21031823 tobicat : Just for the heck of it try command=22 I seem to recall that that was the correct one at one time.
--
9000 spaceway III, 7000S SatMex 5 1270, Dlink wirless]]> http://www.dslreports.com/forum/remark,21031823 Sat, 30 Aug 2008 13:28:43 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21031545 WizOz5 : Yeah I tried that last night and it didnt work. The top picture is what Fapmon shows without editing the modem defs. And the bottom picture is what happens when I change the version number in the modem defs. Im not sure whats going on there is little or no support from the maker. And I have tried most of the things I have read in forums.
Click for full size
Click for full size
]]> http://www.dslreports.com/forum/remark,21031545 Sat, 30 Aug 2008 12:32:00 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21028409 Raminto : I do not know if it will work, but you can try to put your version in this line of the pm file like this:
'4.2.1.5' => '/statcgi/pepstats.bin.

It's worth a try
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro]]> http://www.dslreports.com/forum/remark,21028409 Fri, 29 Aug 2008 19:13:55 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21028276 WizOz5 : Yeah you have a newer software version the me. Mine dont do all that. Here is what I got.. I sorta figured thats what you were getting at. Mine dontshow me a lower tree it just lets me click on it thats it.
Click for full size
screenshot
]]> http://www.dslreports.com/forum/remark,21028276 Fri, 29 Aug 2008 18:49:20 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21028158 Raminto : Change this line:
'5.4.1.8' => '/cgi/execAdvCom.bin?Command=63',

replace 5.4.1.8 with your actual version and 63 with your command number.
Maybe this picture will help
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro
Click for full size
]]> http://www.dslreports.com/forum/remark,21028158 Fri, 29 Aug 2008 18:23:57 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21028059 WizOz5 : Can you by chance tell which line I have to edit also?

sub new {
my $invocant = shift;
my $class = ref($invocant) || $invocant;
my $self = {
modemtype => 'DW6000',
main => '/',
pep => {
default => '/cgi/execAdvCom.bin?Command=63',
'4.3.3.5' => '/statcgi/pepstats.bin',
'5.4.0.20' => '/cgi/execAdvCom.bin?Command=57',
'5.4.1.8' => '/cgi/execAdvCom.bin?Command=63',
},
sysinfo => '/sys_info/',
summary => '/stats/summary/summary.html',
@_,
};

bless ($self, $class);
return $self;]]> http://www.dslreports.com/forum/remark,21028059 Fri, 29 Aug 2008 18:02:07 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21028042 WizOz5 : The PEP dont expand when I go to PEP Statistics. This is all that shows. I dont see any command in the lower left either. Maybe the software version is too old? Is there another way to find it?

PEP Statistics
------------------------------------
Local Time: MON JUN 25 13:58:34 2001
------------------------------------

TCP Spoofing Flag Enabled
Rx PBP 4292
Rx PBP Bad Checksum 0
Tx PBP 2157
Rx TCP 4285
Rx TCP Bad Checksum 0
Rx TCP Spoofed 3523
Rx TCP SYN Unspoofed 0
Backbone 1 2 3 4
PBP Status Open Open Open Closed
PBP RX PKTS 3255 95 937 0
PBP TX Pkts 1245 134 778 0
PBP Rx SACK 0 0 0 0
PBP Tx SACK 0 0 0 0
PBP Rx Rst 1 1 1 0
PBP Tx Rst 0 0 0 0
PBP Snd/Rcv Win 10/272 60/273 10/272 0/0
W2L limit/curr 273/0 273/0 273/0 0/0
L2W limit/curr 100/0 26/0 76/0 0/0 ]]> http://www.dslreports.com/forum/remark,21028042 Fri, 29 Aug 2008 17:57:32 EDT Re: [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21027157 Raminto : You can edit the pm file with notepad or wordpad. Yes, put the version of the modem in there and also the right command number.
To get the command number: open »192.168.0.1/fs/advanced/advanced.html

In the menu you expand PEP, then mouse over PEP summary and the command number shows up in the lower left corner of the screen.
Save the changes - stop and restart FapMon.
--
dw7000/.98m/2watt/Horizon1/1390/256k4/5 /xp sp2/desktop compaq 6330CA/linksys wireless/thinkpad xp pro/Toughbook CF-28 xp pro]]> http://www.dslreports.com/forum/remark,21027157 Fri, 29 Aug 2008 15:09:44 EDT [DW6000] hnFapmon no tx/rx information http://www.dslreports.com/forum/remark,21026862 WizOz5 : I have been trying to get this Fapmon program to work correctly on Vista. I cannot get the rx/tx information to show and the bucket always shows 100%. I have Version 4.5.4 of Fapmon. The only problem I can see is that the modem has not updated in a long time. The modem is a DW6000 using software version 4.2.1.5 I have the Fapmon service running and it eems to be working correctly but the Fapmon client does not seem to be getting the info from it. I even tried opening up port 6000 on the firewall and still no luck. I tried editing the .pm file to show the modem firmware version but I dont think I got the right editor for it. Anyone got anyclues as to what I can do to fix it? ]]> http://www.dslreports.com/forum/remark,21026862 Fri, 29 Aug 2008 14:12:21 EDT